Share
Add to Compare
plas
Material Selector
Log In
CategoriesAll
​Plastic MaterialsAdditivesMasterbatchMaterial SelectorPrice IndexPlastic NewsAbout Us
Home
Plastic Datasheets
PA66

PA66 2020UW1 UBE JAPAN

21

Form：Granules | Grade：Heat resistant grade

Supplier(0)
Product Description
Certificates(0)
Datasheet

Product Description

Certificates

No Data...

Technical Data Sheet

Basic PerformanceTest ConditionTest MethodTest ResultTest Unit
Water absorption rateASTM D-5701.3（8.8）%
Shrinkage rateUBEmethod1.7（2.2）%
mechanical propertiesTest ConditionTest MethodTest ResultTest Unit
Charpy Notched Impact StrengthASTM D256/ISO 1793.0kg·cm/cm(J/M)ft·lb/in
tensile strengthASTM D638/ISO 5271150kg/cm²(MPa)[Lb/in²]
elongationASTM D638/ISO 5276%
Rockwell hardnessASTM D785120
Impact strength of cantilever beam gap-30°ASTM D-2563.0Kgf.cm/cm
Tensile strength under fracture23°ASTM D-638650Kgf/cm
elongation23°，YieldASTM D-6386%
Taber wear resistanceASTM D-10445mg
Bending modulus80°ASTM D-7909000（5000）Kgf/cm
tensile strength23°，YieldASTM D-638780（540）Kgf/cm
bending strength23°ASTM D-7901100（600）Kgf/cm
Rockwell hardness23°ASTM D-785120（100）（90）（65）
tensile strength-30°，YieldASTM D-6381150（1100）Kgf/cm
Bending modulus23°ASTM D-79029000（11500）Kgf/cm
Tensile stress23°，0.01ASTM D-695210（110）Kgf/cm
tensile strength80°，YieldASTM D-638430（400）Kgf/cm
bending strength-30°ASTM D-7901400（1300）Kgf/cm
Bending modulus-30°ASTM D-79042000（40000）Kgf/cm
Elongation at Break23°ASTM D-63880（>200）%
Squeezing shear strength23°ASTM D-732700（650）Kgf/cm
Impact strength of cantilever beam gap23°ASTM D-2565.0（25）Kgf.cm/cm
Bending modulusASTM D790/ISO 17842000kg·cm/cm(J/M)ft·lb/in
bending strengthASTM D790/ISO 1781400kg·cm/cm(J/M)ft·lb/in
Elongation at BreakASTM D638/ISO 52780%
thermal performanceTest ConditionTest MethodTest ResultTest Unit
Hot deformation temperature4.6kgf/cmASTM D-648230°C
Hot deformation temperature18.6kgf/cmASTM D-64890°C
Melting temperatureDSC255-265°C
Linear coefficient of thermal expansionASTM D-6968X的10
Hot deformation temperatureHDTASTM D648/ISO 75230℃（℉）
Melting temperature255-265℃（℉）
Linear coefficient of thermal expansionASTM D696/ISO 113598mm/mm.℃
Physical propertiesTest ConditionTest MethodTest ResultTest Unit
densityASTM D792/ISO 11831.14
Water absorption rateASTM D570/ISO 621.3%
Electrical performanceTest ConditionTest MethodTest ResultTest Unit
Volume resistivityASTM D-25710Ω.cm
IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.

Contact Us

Get App

Top