PC/ABS M130-S MARPLEX AUSTRALIA

Properties:
High impact resistance
Moderate heat resistance
Easy to process
Good impact resistance
High mobility
Moderate heat resistance
Medium hardness
Usages:
Automotive sector
Automotive External Parts
Compare

Technical Data Sheet

Basic performance	Test Method	Test Result
density	ASTM D-792	1.12 g/cm³
Shrinkage rate	ASTM D-955	0.4-0.8 %
melt mass-flow rate	ASTM D-1238	12 g/10min
Water absorption rate	ASTM D-570	0.25 %

Mechanical properties	Test Method	Test Result
tensile strength	ASTM D-638	56 Mpa
elongation	ASTM D-638	100 %
Flexural modulus	ASTM D-790	2450 Mpa
bending strength	ASTM D-790	86 Mpa
Impact strength of cantilever beam gap	ASTM D-256	625 J/m
Falling hammer impact	ASTM D-3029	55 J
Rockwell hardness	ASTM D-785	116

Other performance	Test Condition	Test Method	Test Result
UL flame retardant rating		UL94	HB

Thermal performance	Test Method	Test Result
	ASTM D-696	0.000072 cm/cm/℃
		ASTM D-648	102 °C
			ASTM D-648	108 °C
				ASTM D-648	113 °C
vicat	ASTM D-1525	138 °C
Hot filament point temperature	AS/NS 60695.2.12	550 °C

IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.

Get App

Top