Polyolefin, Unspecified FRAGOM PR/410 SI CROSSPOLIMERI ITALY

Product Description

Certificates(0)

Datasheet

Product Description

Certificates

No Data...

Technical Data Sheet

flammability	Test Condition	Test Method	Test Result	Test Unit
Extreme Oxygen Index		ASTM D2863	36	%
HalogenContent		IEC 60754-1	0	%
Temperature index (combustion)		NES715	280	°C
Corrosion of flue gas	pH	IEC 60754-2	>4.50
mechanical properties	Test Condition	Test Method	Test Result	Test Unit
tensile strength	Yield	ISO 527-2	13.5	MPa
Tensile strain	Break	ISO 527-2	180	%
thermal performance	Test Condition	Test Method	Test Result	Test Unit
Hot pressing test	90°C，穿透	IEC 60811	40.0
Physical properties	Test Condition	Test Method	Test Result	Test Unit
density		ASTM D792	1.50	g/cm³
melt mass-flow rate	190°C/21.6kg	ASTM D1238	20	g/10min
hardness	Test Condition	Test Method	Test Result	Test Unit
Shore hardness	ShoreD	ASTM D2240	53
aging	Test Condition	Test Method	Test Result	Test Unit
Change rate of tensile strength in air	110°C,168hr	IEC 60811	5.0	%
Tensile stress change rate	110°C,168hr，Break	IEC 60811	-19	%
Change rate of tensile strength in air	70°C,4hr,在SAE20油中	ISO 1817	0.0	%
Tensile stress change rate	70°C,4hr,在SAE20油中，Break	ISO 1817	-4.0	%

IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.

Get App

Top