Technical Data Sheet
| physical property | Test Condition | Test Method | Test Result |
|---|
| colour | | ME12 | 0.00OK |
| density | | IEC60811-1-3 | 1.46到1.50 g/cm³ |
| Color | | ME12 | -0.800到0.800 |
| Colorb | | ME12 | -1.51到0.0900 |
| ColorL | | ME12 | 25.9到27.9 |
| density | | IEC60811-1-3 | 1.46到1.50 g/cm³ |
| Color | | ME12 | -0.800到0.800 |
| Colorb | | ME12 | -1.51到0.0900 |
| ColorL | | ME12 | 25.9到27.9 |
| colour | | ME12 | 0.00OK |
| hardness | Test Condition | Test Method | Test Result |
|---|
| | NBR7456 | 90到94 |
| | NBR7456 | 90到94 |
| flammability | Test Condition | Test Method | Test Result |
|---|
| Limiting Oxygen Index | | NBR6245 | >30 % |
| Limiting Oxygen Index | | NBR6245 | >30 % |
| Supplementary Information | Test Condition | Test Method | Test Result |
|---|
| Elongation | | IEC60811-1-2 | <25 % |
| Maximum Variables | | IEC60811-1-2 | <25 % |
| Elongation | | IEC60811-1-2 | <25 % |
| Maximum Variables | | IEC60811-1-2 | <25 % |
| Mechanical properties | Test Condition | Test Method | Test Result |
|---|
| Tensile stress | | IEC60811-1-1 | >12.6 MPa |
| Tensile strain | Yield | IEC60811-1-1 | >150 % |
| Tensile stress | | IEC60811-1-1 | >12.6 MPa |
| Tensile strain | Yield | IEC60811-1-1 | >150 % |
| elastomer | Test Condition | Test Method | Test Result |
|---|
| tensile strength | | IEC60811-1-2 | >12.6 MPa |
| elongation | Break | IEC60811-1-2 | >150 % |
| tensile strength | | IEC60811-1-2 | >12.6 MPa |
| elongation | Break | IEC60811-1-2 | >150 % |
| Electrical performance | Test Condition | Test Method | Test Result |
|---|
| Volume resistivity | | NBR5403 | >3.0E+14 ohms·cm |
| Volume resistivity | | NBR5403 | >3.0E+14 ohms·cm |
IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.
Compare