PA66 WELLAMID Nylon 6600 CF 30 HWCP CP-Polymer-Technik GmbH & Co. KG

Properties:

Filler carbon fiber reinforced material 30% filler by weight

Product Description

Certificates(0)

Datasheet

Product Description

Properties:

Filler | carbon fiber reinforced material | 30% | filler by weight

Certificates

No Data...

Technical Data Sheet

impact performance	Test Condition	Test Method	Test Result	Test Unit
Impact strength of simply supported beam without notch	23℃	kJ/m²	11.143to19.964
Charpy Notched Impact Strength	23℃	kJ/m²	3.065to3.343
mechanical properties	Test Condition	Test Method	Test Result	Test Unit
tensile strength	Break,23℃		144.83to292.41	Mpa
Tensile modulus	23℃		8206.9to28000.0	Mpa
Tensile strain	Break,23℃	%	1.9to3.1
thermal performance	Test Condition	Test Method	Test Result	Test Unit
Continuous use temperature		°C	110to220
transverse		mm/mm/°C	68.6E-5-127.0E-5
flow		mm/mm/°C	142.2E-5-203.2E-5
Melting temperature		°C	260
Physical properties	Test Condition	Test Method	Test Result	Test Unit
saturated		%	3.5to5.0
density	23℃	g/cm³	1.28to1.85
balance		%	1.2to1.5
Shrinkage rate	23℃	%	0.10to0.31
Electrical performance	Test Condition	Test Method	Test Result	Test Unit
Dielectric strength	23℃	V/mil	840
Volume resistivity	23℃	ohms·cm	1.0E+12到1.0E+14
hardness	Test Condition	Test Method	Test Result	Test Unit
Ball Pressure Test			222.76to370.34	Mpa

IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.

Get App

Top