PA+PP DENYL P 3010
0
- Properties:Impact performance
CompareTechnical Data Sheet
| Test Condition | Test Method | Test Result | |
|---|---|---|---|
| Suspended wall beam without notch impact strength | ISO 180 | 45 kJ/m² | |
| Heat distortion temperature | ASTM D648A | 190 °C | |
| vicat | ASTM D15252 | 175 °C | |
| RTI Elec | UL 746 | 110 °C | |
| RTI Imp | UL 746 | 110 °C | |
| RTI | UL 746 | 110 °C | |
| tensile strength | Yield | ASTM D638 | 115 MPa |
| elongation | Break | ASTM D638 | 2.5 % |
| Impact strength of cantilever beam gap | ISO 180/A | 12 kJ/m² | |
| density | ASTM D792 | 1.23 g/cm³ | |
| Shrinkage rate | ASTM D955 | 0.40 % | |
| ASTM D955 | 0.60 % | ||
| Tensile modulus | ASTM D638 | 8500 MPa |
IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.
Contact Us
Get App
Top