
PC DBL-4034 SABIC INNOVATIVE US
82
Form:Granules | Grade:Injection grade
Properties:
Easy to formFlame retardantFiller: Glass beads
Typical Applications:
Plastic bag
Product Description
Certificates(0)
Datasheet
Product Description
| Typical Applications: | Plastic bag |
| Properties: | Easy to form | Flame retardant | Filler: Glass beads |
Certificates
No Data...
Technical Data Sheet
| impact performance | Test Condition | Test Method | Test Result | Test Unit |
|---|---|---|---|---|
| Impact strength of cantilever beam gap | 23°C | ISO 180/1A | 6.0 | kJ/m² |
| Suspended wall beam without notch impact strength | 23°C | ISO 180/1U | 25 | kJ/m² |
| mechanical properties | Test Condition | Test Method | Test Result | Test Unit |
| Tensile strain | Yield | ISO 527-2/5 | 3.1 | % |
| Break | ISO 527-2/5 | 4.6 | % | |
| Bending modulus | ISO 178 | 2900 | Mpa | |
| bending strength | ISO 178 | 76.0 | Mpa | |
| Friction coefficient | Itself - Dynamic | ASTM D3702Modified | 0.50 | |
| Fracture bending strain | ISO 178 | 5.3 | % | |
| Wear factor | Washer | ASTM D3702Modified | 94.0 | 10^-10in^5-min/ft-lb-hr |
| Tensile modulus | ISO 527-2/1 | 2800 | Mpa | |
| tensile strength | Yield | ISO 527-2/5 | 42.0 | Mpa |
| Break | ISO 527-2/5 | 40.0 | Mpa | |
| thermal performance | Test Condition | Test Method | Test Result | Test Unit |
| 1.8MPa, unannealed, 64.0mm span of | ISO 75-2/Af | 130 | °C | |
| Linear coefficient of thermal expansion | MD:23to60°C | ISO 11359-2 | 6E-05 | cm/cm/°C |
| TD:23to60°C | ISO 11359-2 | 6.9E-05 | cm/cm/°C | |
| 0.45MPa, unannealed, 64.0mm span | ISO 75-2/Bf | 137 | °C | |
| Physical properties | Test Condition | Test Method | Test Result | Test Unit |
| Shrinkage rate | MD | Internal Method | 0.50-0.70 | % |
| Water absorption rate | 23°C,24hr | ISO 62 | 0.13 | % |
IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.