ABS Jamplast JPPCABS10
0
- Properties:Fillerglass fiber reinforced material10%filler by weight
CompareTechnical Data Sheet
| physical property | Test Condition | Test Method | Test Result |
|---|---|---|---|
| density | ASTMD792 | 1.18 g/cm³ | |
| melt mass-flow rate | ASTMD1238 | 2.6 g/10min | |
| Shrinkage rate | ASTMD955 | 0.40 % | |
| Water absorption rate | ASTMD570 | 0.15 % | |
| ASTMD570 | 0.32 % |
| hardness | Test Condition | Test Method | Test Result |
|---|---|---|---|
| Rockwell hardness | R-Scale | ASTMD785 | 120 |
| Mechanical properties | Test Condition | Test Method | Test Result |
|---|---|---|---|
| bending strength | Yield | ASTMD790 | 98.6 MPa |
| tensile strength | Yield | ASTMD638 | 48.7 MPa |
| Break | ASTMD638 | 50.4 MPa | |
| elongation | Break | ASTMD638 | 4.0 % |
| Flexural modulus | ASTMD790 | 3650 MPa |
| Impact resistance | Test Condition | Test Method | Test Result |
|---|---|---|---|
| Impact strength of cantilever beam gap | ASTMD256 | 80 J/m | |
| ASTMD256 | 230 J/m | ||
| Dart impact equipped with measuring instruments | ASTMD3763 | 5.65 J | |
| ASTMD3763 | 12.4 J |
| Thermal performance | Test Condition | Test Method | Test Result |
|---|---|---|---|
| ASTMD648 | 121 °C | ||
| ASTMD648 | 127 °C | ||
| ASTMD696 | 5.8E-05 cm/cm/°C |
IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.
Contact Us
Get App
Top