Technical Data Sheet
| physical property | Test Condition | Test Method | Test Result |
|---|
| density | | ASTM D792 | 1.34 g/cm³ |
| Shrinkage rate | | ASTM D955 | 0.70 % |
| Water absorption rate | | ASTM D570 | 0.15 % |
| hardness | Test Condition | Test Method | Test Result |
|---|
| Rockwell hardness | R-Scale | ASTM D785 | 126 |
| flammability | Test Condition | Test Method | Test Result |
|---|
| UL flame retardant rating | | UL 94 | V-0 |
| Mechanical properties | Test Condition | Test Method | Test Result |
|---|
| Tensile modulus | | ASTM D638 | 11000 MPa |
| tensile strength | Yield | ASTM D638 | 179 MPa |
| tensile strength | | ASTM D638 | 179 MPa |
| elongation | Break | ASTM D638 | 2.4 % |
| Flexural modulus | | ASTM D790 | 8270 MPa |
| bending strength | | ASTM D790 | 262 MPa |
| bending strength | Yield | ASTM D790 | 262 MPa |
| Impact resistance | Test Condition | Test Method | Test Result |
|---|
| Impact strength of cantilever beam gap | | ASTM D256 | 69 J/m |
| Suspended wall beam without notch impact strength | | ASTM D4812 | 530 J/m |
| Thermal performance | Test Condition | Test Method | Test Result |
|---|
| Heat distortion temperature | | ASTM D648 | 277 °C |
IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.
Compare