Technical Data Sheet
| physical property | Test Condition | Test Method | Test Result |
|---|
| density | | ASTM D1505 | 0.922 g/cm³ |
| melt mass-flow rate | | ASTM D1238 | 2.0 g/10min |
| optical performance | Test Condition | Test Method | Test Result |
|---|
| gloss | | ASTM D2457 | 46 |
| transparency | | ASTM D1746 | 25.0 |
| Haze ratio | | ASTM D1003 | 20 % |
| Supplementary Information | Test Condition | Test Method | Test Result |
|---|
| Viscosity | | ASTM D3354 | 30.0 g/100cm² |
| Mechanical properties | Test Condition | Test Method | Test Result |
|---|
| coefficient of friction | Blown Film | ASTM D1894 | 0.050 |
| film | Test Condition | Test Method | Test Result |
|---|
| film thickness | | | 30 µm |
| tensile strength | | ASTM D882 | 40.0 MPa |
| tensile strength | | ASTM D882 | 20.0 MPa |
| elongation | | ASTM D882 | 750 % |
| elongation | | ASTM D882 | 800 % |
| Dart impact | | ASTM D1709 | 70 g |
| Elmendorf tear strength | | ASTM D1922 | 29.4 kN/m |
| Elmendorf tear strength | | ASTM D1922 | 147.1 kN/m |
| Thermal performance | Test Condition | Test Method | Test Result |
|---|
| brittle temperature | | ASTM D746 | <-70.0 °C |
| vicat | | ASTM D1525 | 101 °C |
IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.
Compare