Technical Data Sheet
| Uncured Properties | Test Condition | Test Method | Test Result |
|---|
| | ASTMD2393 | 220 Pa·s |
| Curing Time | | | 2.0 hr |
| Curing Time | | | 3.0到4.0 hr |
| Curing Time | | | 6.0 hr |
| Curing Time | | | 150 min |
| colour | | | Amber |
| colour | | | Black |
| density | | | 0.948 g/cm³ |
| density | | | 2.59 g/cm³ |
| | ASTMD2393 | 0.70 Pa·s |
| | ASTMD2393 | 50 Pa·s |
| thermosetting | Test Condition | Test Method | Test Result |
|---|
| | | 52 wk |
| | | 4.0 hr |
| Resin | | 按重量计算的混合比:100 |
| Hardener | | 按重量计算的混合比:3.0到4.0 |
| hardness | Test Condition | Test Method | Test Result |
|---|
| | ASTMD2240 | 90到95 |
| flammability | Test Condition | Test Method | Test Result |
|---|
| UL flame retardant rating | | UL94 | V-0 |
| Mechanical properties | Test Condition | Test Method | Test Result |
|---|
| tensile strength | | ASTMD638 | 58.6 MPa |
| elongation | Break | ASTMD638 | <1.0 % |
| bending strength | | ASTMD790 | 93.1 MPa |
| compressive strength | | ASTMD695 | 124 MPa |
| Electrical performance | Test Condition | Test Method | Test Result |
|---|
| Volume resistivity | | ASTMD257 | 1E+15 ohms·cm |
| dielectric strength | | ASTMD149 | 17 kV/mm |
| dielectric constant | | ASTMD150 | 6.30 |
| Dissipation Factor | | ASTMD150 | 0.015 |
| Thermal performance | Test Condition | Test Method | Test Result |
|---|
| | | 2.6E-05 cm/cm/°C |
| thermal conductivity | | | 2.9 W/m/K |
| | | 155 °C |
| Service | | | 155 °C |
IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.
Compare