mechanical properties	Test Condition	Test Method	Test Result	Test Unit
Tensile modulus	1.0mm/min	ISO 527	（3200干态）（1000湿态）	Mpa
tensile strength	Yield50mm/min	ISO 527	（80干态）（40湿态）	Mpa
elongation	Yield50mm/min	ISO 527	（4干态）（20湿态）	%
elongation	elongation	Break50mm/min	ISO 527	（20干态）（50湿态）	%
Tensile creep modulus	1hr	ISO 899	（800湿态）	Mpa
Tensile creep modulus	Tensile creep modulus	1000hr	ISO 899	（600湿态）	Mpa
bending strength	2.0mm/min	ISO 178	（110干态）（35湿态）	Mpa
bending strength	bending strength	3.5%Strain 2.0mm/min	ISO 178	（95干态）（25湿态）	Mpa
Bending modulus	2.0mm/min	ISO 178	（2900干态）（850湿态）	Mpa
Bending strain	2.0mm/min	ISO 178	（6干态）（8湿态）	%
Impact strength of cantilever beam gap	23℃	ISO 180	（10干态）（30湿态）	kJ/m²
Suspended wall beam without notch impact strength	23℃	ISO 180	（NB干态）（NB湿态)	kJ/m²
Suspended wall beam without notch impact strength	Suspended wall beam without notch impact strength	-30℃	ISO 180	（NB干态）（NB湿态)	kJ/m²
Charpy Notched Impact Strength	23℃	ISO 179	（10干态）（20湿态)	kJ/m²
	Charpy Notched Impact Strength	-30°C	ISO 179	（10干态）（10湿态)	kJ/m²
		Charpy Notched Impact Strength	23℃	ISO 179	（NB干态）（NB湿态)	kJ/m²
		Charpy Notched Impact Strength	Charpy Notched Impact Strength	-30℃	ISO 179	（NB干态）（NB湿态)	kJ/m²
Puncture resistance	最大力23℃	ISO 6603	5900	N
	Puncture resistance	最大力-30℃	ISO 6603	7300	N
		Puncture resistance	23℃	ISO 6603	90	J
		Puncture resistance	Puncture resistance	-30℃	ISO 6603	85	J
thermal performance	Test Condition	Test Method	Test Result	Test Unit
Hot deformation temperature	1.8MPa	ISO 75	55	°C
	Hot deformation temperature	0.45MPa	ISO 75	160	°C
	Hot deformation temperature	Hot deformation temperature	8.0MPa	ISO 75	45	°C
Vicat softening temperature	120℃/hr 50N	ISO 306	200	°C
Vicat softening temperature	Vicat softening temperature	50℃/hr 50N	ISO 306	200	°C
Melting temperature	10℃/min	ISO 11357	222	°C
Linear coefficient of thermal expansion	Flow23~550℃	ISO 11359	0.00010	cm/cm/℃
Linear coefficient of thermal expansion	Linear coefficient of thermal expansion	垂直23~55℃	ISO 11359	0.00011	cm/cm/℃
Physical properties	Test Condition	Test Method	Test Result	Test Unit
density		ISO 1183	1140	kg/㎥
Shrinkage rate	Flow150x105x3mm 270℃ 50MPa模具温度:80℃	ISO 2577	1.02	%
	Shrinkage rate	垂直150x105x3mm 270°C 50Mpa模具温度:80℃	ISO 2577	1.16	%
		Shrinkage rate	Flow 150xW5x3mm120°C4hr	ISO 2577	0.32	%
		Shrinkage rate	Shrinkage rate	垂直 150x105x3mm 120°C4hr	ISO 2577	0.4	%
Water absorption rate	23℃	ISO 62	10	%
Water absorption rate	Water absorption rate	23℃50RHEquilibrium	ISO 62	3	%
Apparent density		ISO 60	700	kg/㎥
Electrical performance	Test Condition	Test Method	Test Result	Test Unit
Volume resistivity		IEC 60093	（10000000000000干态）（10000000000湿态）	Ω.m
Surface resistivity		IEC 60093	（100000000000000干态）（10000000000000湿态）	Ω
Dielectric strength	1.0mm	IEC 60243	（30干态）（30湿态）	KV/mm
Dielectric constant	100Hz	IEC 60250	（4干态）（15湿态）
Dielectric constant	Dielectric constant	1MHz	IEC 60250	（3.5干态）（4湿态）
Dissipation factor	100Hz	IEC 60250	（0.017干态）（0.2湿态）
Dissipation factor	Dissipation factor	1MHz	IEC 60250	（0.02干态）（0.12湿态）
Compared to the anti leakage trace index	溶液A	IEC 60112		V
Compared to the anti leakage trace index	Compared to the anti leakage trace index	M溶液B	IEC 60112		V
hardness	Test Condition	Test Method	Test Result	Test Unit
Ball Pressure Test		ISO 2039	（140干态）（50湿态）	n/mm²
flame retardant performance	Test Condition	Test Method	Test Result	Test Unit
UL flame retardant rating	638mm	UL 94	V-2
	UL flame retardant rating	1.5mm	UL 94	\A2
		UL flame retardant rating	3.0mm	UL 94	U2
		UL flame retardant rating	UL flame retardant rating	6.0mm	UL 94	V-2
Relative temperature of heating wire	2.0mm	IEC 60695	750	°C
Extreme Oxygen Index	方法A	ISO 4589	26	%

IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.

Get App

Top