Technical Data Sheet
| physical property | Test Condition | Test Method | Test Result |
|---|
| Shrinkage rate | | | 0.90to1.1 % |
| density | | ASTM D792 | 0.917 g/cm³ |
| melt mass-flow rate | | ASTM D1238 | 0.25 g/10min |
| Shrinkage rate | | | 1.5to2.0 % |
| hardness | Test Condition | Test Method | Test Result |
|---|
| Shore hardness | | ASTM D2240 | 42 |
| optical performance | Test Condition | Test Method | Test Result |
|---|
| Haze ratio | | ASTM D1003 | 35 % |
| Supplementary Information | Test Condition | Test Method | Test Result |
|---|
| Temperature | | | 38to54 °C |
| mold temperature | | | 146to160 °C |
| Mechanical properties | Test Condition | Test Method | Test Result |
|---|
| tensile strength | Yield | ASTM D638 | 9.65 MPa |
| elongation | Break | ASTM D638 | 100 % |
| Thermal performance | Test Condition | Test Method | Test Result |
|---|
| brittle temperature | | ASTM D746 | 23.9 °C |
| specific heat | | | 2090 J/kg/°C |
IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.
Compare