HDPE DGDB 6097 PETROCHINA DAQING

Form：Granules | Grade：Thin film grade

Properties:

Strong resistance to exte Good film-forming properHigh strength

Typical Applications:

Unimodal membraneSuitable for making shopping bagsBag liningVarious coversComposite agricultural film etcHMWHDPE film

Supplier(1)

Product Description

Certificates(0)

Datasheet

Product Description

Typical Applications:	Unimodal membrane \| Suitable for making shopping bags \| Bag lining \| Various covers \| Composite agricultural film \| etc \| HMW \| HDPE film
Properties:	Strong resistance to exte \| Good film-forming proper \| High strength

Certificates

No Data...

Technical Data Sheet

Other performance	Test Condition	Test Method	Test Result	Test Unit
fisheye	0.4mm		优级｜≤15	个/1520cm2
	fisheye	0.4mm		一级｜≤25	个/1520cm2
		fisheye	0.4mm		合格｜≤40	个/1520cm2
			fisheye	0.8mm		优级｜≤2	个/1520cm2
				fisheye	0.8mm		一级｜≤4	个/1520cm2
				fisheye	fisheye	0.8mm		合格｜≤8	个/1520cm2
Particle size distribution	蛇皮和丝发		优级｜≤20	个/kg
	Particle size distribution	蛇皮和丝发		一级｜≤20	个/kg
		Particle size distribution	蛇皮和丝发		合格｜≤40	个/kg
			Particle size distribution	大粒和小粒		优级｜≤10	g/kg
				Particle size distribution	大粒和小粒		一级｜≤10	g/kg
					Particle size distribution	大粒和小粒		合格｜≤10	g/kg
						Particle size distribution	污染粒子		优级｜≤10	个/kg
							Particle size distribution	污染粒子		一级｜≤20	个/kg
							Particle size distribution	Particle size distribution	污染粒子		合格｜≤40	个/kg
Basic Performance	Test Condition	Test Method	Test Result	Test Unit
melt mass-flow rate			优级｜0.4±0.02	g/10min
	melt mass-flow rate			一级｜0.4±0.02	g/10min
	melt mass-flow rate	melt mass-flow rate			合格｜0.4±0.04	g/10min
density			优级｜0.948±0.002	g/cm³
	density			一级｜0.948±0.003	g/cm³
		density			合格｜0.948±0.004	g/cm³
		density	density			0.948	kg/m
melt mass-flow rate	21.6kg		9	g/10min
mechanical properties	Test Condition	Test Method	Test Result	Test Unit
Dart impact			合格｜-	g
tensile strength	Break		优级｜≥22	Mpa
	tensile strength	Break		一级｜≥20	Mpa
	tensile strength	tensile strength	Break		合格｜≥18	Mpa
elongation	Break		优级｜≥450	%
	elongation	Break		一级｜≥450	%
	elongation	elongation	Break		合格｜≥450	%
Dart impact			优级｜≤80	g
Dart impact	Dart impact			一级｜-	g
elongation	Break		400	%
tensile strength			30	Mpa
Physical properties	Test Condition	Test Method	Test Result	Test Unit
Nominal tensile fracture strain		IEC 60093	652	%
turbidity			优级｜≤75	%
	turbidity			一级｜-	%
	turbidity	turbidity			合格｜-	%

IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.

Get App

Top