HDPE HS5608 BRASKEM BRAZIL

Form：Granules

Properties:

Easy to processHigh impact resistancemacromoleculeResistance to stress cracHigh rigidity

Typical Applications:

chipBlow molding applicationsdrumAgricultural applicationscontainerNon specific food

Supplier(1)

Product Description

Certificates(0)

Datasheet

Product Description

Typical Applications:	chip \| Blow molding applications \| drum \| Agricultural applications \| container \| Non specific food
Properties:	Easy to process \| High impact resistance \| macromolecule \| Resistance to stress crac \| High rigidity

Certificates

No Data...

Technical Data Sheet

impact performance	Test Condition	Test Method	Test Result	Test Unit
Impact strength of cantilever beam gap	-40℃	ASTM D6110	200	J/m
mechanical properties	Test Condition	Test Method	Test Result	Test Unit
Bending modulus	-1%	ASTM D790	1350	Mpa
tensile strength	Break	ASTM D638	35.0	Mpa
thermal performance	Test Condition	Test Method	Test Result	Test Unit
Hot deformation temperature	0.45 MPa, Unannealed, Compression Molded	ASTM D648	73.0	°C
Physical properties	Test Condition	Test Method	Test Result	Test Unit
melt mass-flow rate	190℃/2.16 kg	ASTM D1238	8.5	g/10 min

IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.

Get App

Top