'%20/%3e%3cg%20opacity='1'%20transform='translate(150.5%200)%20rotate(0)'%3e%3cpath%20id='路径%204'%20fill-rule='evenodd'%20style='fill:%23C70000'%20opacity='1'%20d='M494%20472.601L487%20410.101L460%20472.601L494%20472.601Z'%3e%3c/path%3e%3cpath%20id='路径%203'%20fill-rule='evenodd'%20style='fill:%23003686'%20opacity='1'%20d='M80%20620.761C152%20676.261%20250%20670.761%20264.5%20670.761C351%20664.261%20412.5%20636.261%20443.5%20620.761C536%20572.261%20580.45%20516.261%20599.5%20492.261C566.05%20492.261%20483.5%20492.261%20465.5%20492.261C408%20532.761%20385.5%20541.761%20369%20550.261C262.5%20599.761%20214%20591.261%20184%20591.261C81%20584.761%2024.3%20510.211%200%20478.261C23%20580.261%2067.5%20609.261%2080%20620.761Z'%3e%3c/path%3e%3cpath%20id='路径%202'%20fill-rule='evenodd'%20style='fill:%23003686'%20opacity='1'%20d='M427.998%202.26C325.498%2014.26%20222.068%2073.64%20247.998%2063.76C384.498%2011.76%20427.998%2024.76%20437.998%2024.76C526.998%2041.76%20559.998%2085.76%20568.998%2095.76C606.498%20142.26%20611.398%20187.06%20613.498%20206.26C631.458%20206.26%20679.498%20206.26%20703.998%20206.26C692.998%20109.26%20633.378%2063.91%20622.998%2056.26C563.998%2012.76%20513.248%205.41%20491.498%202.26C467.498%20-2.24%20437.168%201.19%20427.998%202.26Z'%3e%3c/path%3e%3cpath%20id='路径%201'%20fill-rule='evenodd'%20style='fill:%23C70000'%20opacity='1'%20d='M232%20206.763C243%20178.763%20262%20156.763%20273.5%20140.263C329%2080.2634%20374%2069.7634%20410.5%2061.2634C446.5%2052.2634%20499%2061.2634%20504.5%2061.2634C446%2039.7634%20393%2040.7634%20387.5%2040.7634C308.5%2047.2634%20259.5%2075.2634%20237%2088.7634C162.5%20135.263%20122.95%20185.313%20106%20206.763C139.86%20206.763%20221.5%20206.763%20232%20206.763Z'%3e%3c/path%3e%3c/g%3e%3cpath%20id='减去顶层'%20fill-rule='evenodd'%20style='fill:%23003686'%20opacity='1'%20d='M379.519,227.698l4.237,4.101l-38.576,198.188h98.804l3.966,3.839l-7.614,38.817h-147.091l-4.064,-3.934l46.975,-241.011zM900.883,363.706c-21,-8.75%20-34.89067,-17.22667%20-41.672,-25.43c-6.78133,-8.20333%20-10.172,-19.19533%20-10.172,-32.976c0,-24.06267%208.832,-43.75033%2026.496,-59.063c17.664,-15.312%2040.55067,-22.968%2068.66,-22.968c11.266,0%2022.231,1.121%2032.895,3.363c10.664,2.242%2020.974,5.60533%2030.93,10.09l-8.139,40.672l-5.05,2.827c-6.54467,-5.18467%20-13.96233,-9.21167%20-22.253,-12.081c-9.95333,-3.44533%20-21.00033,-5.168%20-33.141,-5.168c-12.906,0%20-23.406,3.08967%20-31.5,9.269c-8.09333,6.18%20-12.14,14.08233%20-12.14,23.707c0,9.18733%2010.06233,18.32%2030.187,27.398l1.149,0.493l19.031,8.367c15.96867,7.10933%2027.64433,15.668%2035.027,25.676c7.38267,10.00733%2011.074,22.28467%2011.074,36.832c0,25.156%20-8.80467,45.226%20-26.414,60.21c-17.60933,14.98467%20-41.39833,22.477%20-71.367,22.477c-12.03133,0%20-24.30867,-1.422%20-36.832,-4.266c-12.52333,-2.84333%20-25.56633,-7.16367%20-39.129,-12.961l8.62,-44.559l4.63,-2.592c9.52333,7.45333%2019.435,13.24467%2029.735,17.374c11.59333,4.64867%2023.24167,6.973%2034.945,6.973c14.54667,0%2025.97633,-3.19933%2034.289,-9.598c8.31267,-6.39867%2012.469,-15.06667%2012.469,-26.004c0,-6.78133%20-1.914,-12.66%20-5.742,-17.636c-3.82867,-4.97667%20-9.51633,-9.051%20-17.063,-12.223zM54.3672,227.698h68.9058c25.81267,0%2045.473,5.004%2058.981,15.012c13.50733,10.008%2020.261,24.58233%2020.261,43.723c0,12.46867%20-1.996,24.82767%20-5.988,37.077c-3.992,12.25%20-9.16,21.98467%20-15.504,29.204c-8.53133,9.95267%20-19.14067,17.14433%20-31.828,21.575c-12.68733,4.42867%20-29.14817,6.643%20-49.3825,6.643h-26.9063l-17.8828,91.711h-43.7778l-3.88732,-3.761zM642.062,227.698h59.063l18.238,240.969l-4.109,3.976h-43.66l-2.297,-60.539h-0.041l-1.756,-40.844l-0.04,-0.002l-3.249,-98.607l-41.151,94.615l-0.06,-0.006l-20.5,47.5h0.005l-25.411,57.883h-43.849l-3.589,-3.474zM94.7266,268.386l-13.7813,71.859h23.4607c15.96867,0%2027.918,-3.69133%2035.848,-11.074c7.92933,-7.38267%2011.894,-18.457%2011.894,-33.223c0,-9.95333%20-2.84367,-17.03533%20-8.531,-21.246c-5.68733,-4.21067%20-15.367,-6.316%20-29.039,-6.316z'%3e%3c/path%3e%3c/svg%3e)
PBT 420SE0-8051 SABIC INNOVATIVE US
87
Form：Granules | Grade：Injection grade
Properties:
Glass fiber reinforcedhigh strength
Typical Applications:
Office suppliesElectronic accessories
Product Description
Certificates(0)
Datasheet
Product Description
| Typical Applications: | Office supplies | Electronic accessories |
| Properties: | Glass fiber reinforced | high strength |
Certificates
No Data...
Technical Data Sheet
| impact performance | Test Condition | Test Method | Test Result | Test Unit |
|---|---|---|---|---|
| Impact strength of cantilever beam gap | 23°C | ASTM D256 | 60 | J/m |
| -30°C | ASTM D256 | 57 | J/m | |
| Impact strength of simply supported beam without notch | 23°C | ISO 179/1eU | 50 | kJ/m² |
| -30°C | ISO 179/1eU | 50 | kJ/m² | |
| Charpy Notched Impact Strength | 23°C | ISO 179/1eA | 7.0 | kJ/m² |
| -30°C | ISO 179/1eA | 6.0 | kJ/m² | |
| Impact strength of cantilever beam gap | -30°C | ISO 180/1A | 6.0 | kJ/m² |
| 23°C | ISO 180/1A | 7.0 | kJ/m² | |
| 23°C | ASTM D4812 | 620 | J/m | |
| Suspended wall beam without notch impact strength | -30°C | ISO 180/1U | 45 | kJ/m² |
| 23°C | ISO 180/1U | 45 | kJ/m² | |
| Dart impact | 23°C,TotalEnergy | ASTM D3763 | 5.00 | J |
| flammability | Test Condition | Test Method | Test Result | Test Unit |
| Extreme Oxygen Index | ISO 4589-2 | 32 | % | |
| UL flame retardant rating | 0.40mm | UL 94 | V-2 | |
| 0.71mm | UL 94 | V-0 | ||
| 2.0mm | UL 94 | 5VA | ||
| Burning wire flammability index | 1.0mm | IEC 60695-2-12 | 960 | °C |
| mechanical properties | Test Condition | Test Method | Test Result | Test Unit |
| Bending modulus | 50.0mmSpan | ASTM D790 | 9800 | Mpa |
| Tensile strain | Break | ISO 527-2/5 | 1.9 | % |
| elongation | Break | ASTM D638 | 2.0 | % |
| Tensile strain | Yield | ISO 527-2/5 | 1.9 | % |
| elongation | Yield | ASTM D638 | 2.0 | % |
| tensile strength | Break | ISO 527-2/5 | 120 | Mpa |
| Break | ASTM D638 | 120 | Mpa | |
| Yield | ISO 527-2/5 | 120 | Mpa | |
| Yield | ASTM D638 | 120 | Mpa | |
| Tensile modulus | ISO 527-2/1 | 10000 | Mpa | |
| Taber abraser | 1000Cycles,1000g,CS-17Wheel | Internal Method | 22.0 | mg |
| bending strength | Break,50.0mmSpan | ASTM D790 | 186 | Mpa |
| ISO 178 | 180 | Mpa | ||
| Bending modulus | ISO 178 | 9500 | Mpa | |
| Tensile modulus | ASTM D638 | 12000 | Mpa | |
| thermal performance | Test Condition | Test Method | Test Result | Test Unit |
| Hot deformation temperature | 1.8MPa,Unannealed,64.0mmSpan10 | ISO 75-2/Af | 200 | °C |
| Vicat softening temperature | ASTM D152511 | 200 | °C | |
| -- | ISO 306/A50 | 220 | °C | |
| Hot deformation temperature | 1.8MPa,Unannealed,100mmSpan9 | ISO 75-2/Ae | 195 | °C |
| 1.8MPa,Unannealed,3.20mm | ASTM D648 | 200 | °C | |
| 0.45MPa,Unannealed,100mmSpan | ISO 75-2/Be | 220 | °C | |
| Vicat softening temperature | -- | ISO 306/B50 | 200 | °C |
| -- | ISO 306/B120 | 200 | °C | |
| Ball Pressure Test | 125°C | IEC 60695-10-2 | Pass | |
| Linear coefficient of thermal expansion | MD：-40to40°C | ASTME831 | 2.5E-05 | cm/cm/°C |
| MD：-40to40°C | ISO 11359-2 | 2.5E-05 | cm/cm/°C | |
| thermal conductivity | ISO 8302 | 0.25 | W/m/K | |
| RTI Elec | UL 746 | 130 | °C | |
| RTI Imp | UL 746 | 130 | °C | |
| Linear coefficient of thermal expansion | MD：23to80°C | ISO 11359-2 | 2.5E-05 | cm/cm/°C |
| TD：-40to40°C | ASTME831 | 8.9E-05 | cm/cm/°C | |
| TD：-40to40°C | ISO 11359-2 | 8.9E-05 | cm/cm/°C | |
| TD：23to80°C | ISO 11359-2 | 1.2E-04 | cm/cm/°C | |
| RTI Str | UL 746 | 140 | °C | |
| Hot deformation temperature | 0.45MPa,Unannealed,3.20mm | ASTM D648 | 212 | °C |
| Physical properties | Test Condition | Test Method | Test Result | Test Unit |
| density | ASTM D792 | 1.63 | g/cm³ | |
| Specific volume | ASTM D792 | 0.610 | cm³/g | |
| density | ISO 1183 | 1.63 | g/cm³ | |
| Water absorption rate | Saturation,23°C | ISO 62 | 0.090 | % |
| melt mass-flow rate | 250°C/5.0kg | ASTM D1238 | 42 | g/10min |
| Melt Volume Flow Rate (MVR) | 250°C/5.0kg | ISO 1133 | 29.0 | cm3/10min |
| Shrinkage rate | MD：--2 | Internal Method | 0.10-0.50 | % |
| MD：3.20mm | Internal Method | 0.50-0.70 | % | |
| TD：--2 | Internal Method | 0.40-0.80 | % | |
| TD：3.20mm | Internal Method | 0.50-1.0 | % | |
| Water absorption rate | Equilibrium,23°C,50%RH | ISO 62 | 0.070 | % |
| Outdoor applicability | UL 746C | f2 | ||
| Electrical performance | Test Condition | Test Method | Test Result | Test Unit |
| Dielectric strength | 3.20mm,inAir | ASTM D149 | 19 | KV/mm |
| Compared to the anti leakage trace index | CTI | UL 746 | PLC 3 | |
| High arc combustion index | HAI | UL 746 | PLC 0 | |
| High voltage arc tracing rate | HVTR | UL 746 | PLC 4 | |
| Hot wire ignition | HWI | UL 746 | PLC 2 | |
| Dielectric strength | 1.60mm,in Oil | ASTM D149 | 24 | KV/mm |
| Surface resistivity | IEC 60093 | >1.0E+15 | ohms | |
| Volume resistivity | ASTM D257 | >1.0E+15 | ohms·cm | |
| IEC 60093 | >1.0E+15 | ohms·cm | ||
| Dielectric strength | 0.800mm,in Oil | IEC 60243-1 | 23 | KV/mm |
| 1.60mm,in Oil | IEC 60243-1 | 22 | KV/mm | |
| 3.20mm,in Oil | IEC 60243-1 | 16 | KV/mm | |
| Dielectric constant | 100Hz | ASTM D150 | 3.80 | |
| 1MHz | ASTM D150 | 3.70 | ||
| Relative permittivity | 50Hz | IEC 60250 | 3.30 | |
| 60Hz | IEC 60250 | 3.30 | ||
| 100Hz | IEC 60250 | 3.80 | ||
| 1MHz | IEC 60250 | 3.30 | ||
| Dissipation factor | 1MHz | IEC 60250 | 0.010 | |
| 50Hz | IEC 60250 | 1E-03 | ||
| 60Hz | IEC 60250 | 1E-03 | ||
| 100Hz | IEC 60250 | 2E-03 | ||
| Arc resistance | ASTM D495 | PLC6 | ||
| Dissipation factor | 100Hz | ASTM D150 | 2E-03 | |
| 1MHz | ASTM D150 | 0.020 | ||
| hardness | Test Condition | Test Method | Test Result | Test Unit |
| Rockwell hardness | R-Scale | ASTM D785 | 119 | |
| R-Scale | ISO 2039-2 | 119 | ||
| Ball Pressure Test | H358/30 | ISO 2039-1 | 118 | Mpa |
IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.