PA12 P110 TL ARKEMA FRANCE

Form：Granules

Properties:

LubricityHydrolysis resistanceHigh impact resistancePhotostabilityThermal stabilityUV resistance

Typical Applications:

Pipe fittingsApplications and pipe fittings in the automotive f

Supplier(1)

Product Description

Certificates(0)

Datasheet

Product Description

Typical Applications:	Pipe fittings \| Applications and pipe fittings in the automotive f
Properties:	Lubricity \| Hydrolysis resistance \| High impact resistance \| Photostability \| Thermal stability \| UV resistance

Certificates

No Data...

Technical Data Sheet

impact performance	Test Condition	Test Method	Test Result	Test Unit
Charpy Notched Impact Strength	23°C	ISO 179	75	kJ/m²
Charpy Notched Impact Strength	Charpy Notched Impact Strength	-30°C	ISO 179	8.0	kJ/m²
Impact strength of simply supported beam without notch	23°C	ISO 179	NoBreak
Impact strength of simply supported beam without notch	Impact strength of simply supported beam without notch	-30°C	ISO 179	NoBreak
mechanical properties	Test Condition	Test Method	Test Result	Test Unit
Bending modulus		ISO 178	1020	Mpa
Tensile strain	Break	ISO 527-2	>150	%
Tensile strain	Tensile strain	Yield	ISO 527-2	13	%
tensile strength	Break	ISO 527-2	45.0	Mpa
tensile strength	tensile strength	Yield	ISO 527-2	32.0	Mpa
Tensile modulus		ISO 527-2	1120	Mpa
thermal performance	Test Condition	Test Method	Test Result	Test Unit
Melting temperature		ISO 11357-3	176	°C
Physical properties	Test Condition	Test Method	Test Result	Test Unit
Melt Volume Flow Rate (MVR)	275°C/5.0kg	ISO 11357	0.400	cm3/10min
density		ISO 1183	1.00	g/cm³
hardness	Test Condition	Test Method	Test Result	Test Unit
Shore hardness	ShoreD,15Sec	ISO 868	66
Shore hardness	Shore hardness	ShoreD	ISO 868	73
Supplementary Information	Test Condition	Test Method	Test Result	Test Unit
ISO Shortcut		ISO 1874	PA12-HI.EHL.24-010

IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.

Get App

Top