PP P700J TPI THAILAND

Form：Granules | Grade：Injection grade

Properties:

Food contact levelEasy to processLow odorAcceptable food contactGood processingHomopolymerLow without odor

Typical Applications:

Food containersToyHousehold appliancesFood containersHome FurnishingsToy

Supplier(0)

Product Description

Certificates(0)

Datasheet

Product Description

Typical Applications:	Food containers \| Toy \| Household appliances \| Food containers \| Home Furnishings \| Toy
Properties:	Food contact level \| Easy to process \| Low odor \| Acceptable food contact \| Good processing \| Homopolymer \| Low without odor

Certificates

No Data...

Technical Data Sheet

optical performance	Test Condition	Test Method	Test Result	Test Unit
gloss		ASTM D2457	51
turbidity		ASTM D1003	47	%
Other performance	Test Condition	Test Method	Test Result	Test Unit
UL flame retardant rating		UL 94	HB
Basic Performance	Test Condition	Test Method	Test Result	Test Unit
density		ASTM D1505	0.91	g/cm³
melt mass-flow rate	230°C/2.16 kg	ASTM D1238	12	g/10min
Shrinkage rate	Across Flow: 2.00 mm	ASTM D955	1.2	%
Shrinkage rate	Shrinkage rate	Flow: 2.00 mm	ASTM D955	1.2	%
mechanical properties	Test Condition	Test Method	Test Result	Test Unit
Bending modulus		ASTM D790	1420	Mpa
Impact strength of cantilever beam gap	0℃	ASTM D256	19.6
Impact strength of cantilever beam gap	Impact strength of cantilever beam gap	23℃	ASTM D256	29.4
Shore hardness		ASTM D785	90
tensile strength	Break	ASTM D638	19.6	Mpa
tensile strength	tensile strength	Yield	ASTM D638	31.4	Mpa
Elongation at Break	Break	ASTM D638	650	%
thermal performance	Test Condition	Test Method	Test Result	Test Unit
Hot deformation temperature	0.45Mpa, Unannealed	ASTM D648	110	°C
Hot deformation temperature	Hot deformation temperature	1.8Mpa, Unannealed	ASTM D648	65	°C
Brittle temperature		ASTM D746	-20	°C
Vicat softening temperature		ASTM D1525	155	°C
Melting temperature		ASTM D2117	163	°C

IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.

Get App

Top