Technical Data Sheet
| 物理性能 | Test Condition | Test Method | Test Result |
|---|
| 收缩率 | TD | % | 1.0 -- |
| 收缩率 | MD | % | 0.30 -- |
| 热性能 | Test Condition | Test Method | Test Result |
|---|
| RTI Elec | 0.400mm | °C | 140 -- |
| RTI Elec | 0.750mm | °C | 140 -- |
| RTI Elec | 1.50mm | °C | 140 -- |
| RTI Elec | 3.00mm | °C | 140 -- |
| 热变形温度 | 1.8MPa,未退火 | °C | 281 -- |
| 熔融温度1 | | °C | 310 -- |
| 线性热膨胀系数 | MD | cm/cm/°C | 1.8E-05 -- |
| 线性热膨胀系数 | MD:-40到23°C | cm/cm/°C | 1.8E-05 -- |
| 线性热膨胀系数 | MD:55到160°C | cm/cm/°C | 1.2E-05 -- |
| 线性热膨胀系数 | TD | cm/cm/°C | 6.2E-05 -- |
| 线性热膨胀系数 | TD:-40到23°C | cm/cm/°C | 6E-05 -- |
| 线性热膨胀系数 | TD:55到160°C | cm/cm/°C | 9.5E-05 -- |
| 可燃性 | Test Condition | Test Method | Test Result |
|---|
| 可燃性等级 | 0.400mm | | V-0 -- |
| 可燃性等级 | 1.50mm | | V-0 -- |
| 灼热丝易燃指数 | 0.400mm | °C | 960 -- |
| 灼热丝易燃指数 | 3.00mm | °C | 960 -- |
| 热灯丝点火温度 | 0.400mm | °C | 700 -- |
| 热灯丝点火温度 | 3.00mm | °C | 775 -- |
| 极限氧指数 | | % | 37 -- |
| 机械性能 | Test Condition | Test Method | Test Result |
|---|
| 拉伸模量 | | MPa | 10700 11300 |
| 拉伸应力 | 断裂 | MPa | 145 |
| 拉伸应变 | 断裂 | % | 2.1 1.9 |
| 弯曲模量 | | MPa | 9800 10800 |
| 弯曲应力 | | MPa | 225 |
| 电气性能 | Test Condition | Test Method | Test Result |
|---|
| 漏电起痕指数 | | V | 600 -- |
| 冲击性能 | Test Condition | Test Method | Test Result |
|---|
| 简支梁无缺口冲击强度 | -30°C | kJ/m² | 40 |
| 简支梁无缺口冲击强度 | 23°C | kJ/m² | 45 |
IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.
Compare
View Prices