
PP RB707CF BOREALIS EUROPE
458
Form:Granules | Grade:Transparent level
Properties:
High glossHigh transparency
Typical Applications:
Packaging filmFood packagingfilmsealantlabelUnoriented thin filmchipLaminate
Product Description
Certificates(0)
Datasheet
Alternative(2)
Product Description
| Typical Applications: | Packaging film | Food packaging | film | sealant | label | Unoriented thin film | chip | Laminate |
| Properties: | High gloss | High transparency |
Certificates
No Data...
Technical Data Sheet
| optical performance | Test Condition | Test Method | Test Result | Test Unit |
|---|---|---|---|---|
| turbidity | 50.0μm | ASTM D1003 | <8.0 | % |
| gloss | 20°,50.0μm | ASTM D2457 | >70 | |
| mechanical properties | Test Condition | Test Method | Test Result | Test Unit |
| Bending modulus | 23°C,Injection | ISO 178 | 800 | Mpa |
| Friction coefficient | Itself - Dynamic | ISO 8295 | >0.70 | |
| thermal performance | Test Condition | Test Method | Test Result | Test Unit |
| Vicat softening temperature | ISO 306/A50 | 125 | °C | |
| Melting temperature | ISO 3146 | 143to147 | °C | |
| Physical properties | Test Condition | Test Method | Test Result | Test Unit |
| density | ISO 1183 | 0.900-0.910 | g/cm³ | |
| melt mass-flow rate | 230°C/2.16kg | ISO 1133 | 1.5 | g/10min |
| film | Test Condition | Test Method | Test Result | Test Unit |
| Thin film puncture strength | 50μm | ISO 7765-2 | 850 | N |
| film thickness | 50 | µm | ||
| InstrumentedDartImpact | 50μm,TotalEnergy | ISO 7765-2 | 5.00 | J |
| Tensile modulus | TD:50μm | ISO 527-3 | 750to850 | Mpa |
| MD:50μm | ISO 527-3 | 750to850 | Mpa | |
| tensile strength | TD:50μm | ISO 527-3 | 35.0to55.0 | Mpa |
| MD:50μm | ISO 527-3 | 30.0to50.0 | Mpa | |
| elongation | TD:Break,50μm | ISO 527-3 | 700to800 | % |
| MD:Break,50μm | ISO 527-3 | 700to800 | % |
IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.