TPU T4090-3 YANTAI BEST

213

Form：Granules | Processing Methods：Injection Molding,Extrusion Molding

Properties:

Good processabilityShort molding cycleLow temperature resistancHigh pressure resistancepatienceExcellent learning perforHigh economic applicabili

Typical Applications:

Electronic product sheathPrinterblending modificationsnow chainswater poloGluing

Supplier(1)

Product Description

Certificates(1)

Datasheet

Product Description

Typical Applications:	Electronic product sheath \| Printer \| blending modification \| snow chains \| water polo \| Gluing
Properties:	Good processability \| Short molding cycle \| Low temperature resistanc \| High pressure resistance \| patience \| Excellent learning perfor \| High economic applicabili
Processing Methods:	Injection Molding,Extrusion Molding

Certificates

TDS

Technical Data Sheet

物性性能	Test Condition	Test Method	Test Result	Test Unit
密度		ASTMD792	1.21	g/cm3
邵氏硬度		ASTMD2240	94	Shore A
100%模量		ASTMD412	10.10	Mpa
300%模量		ASTM D412	29.24	MPa
拉伸强度	速度300mm/min	ASTMD412	50.13	MPa
断裂伸长率		ASTM D412	411.97	%
撕裂强度		ASTM D624	132.17	N/mm
UVA等级	A法48H	ASTMD1148	3	级
析出	温度75湿度7548H		无析出

IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.

Get App

Top