Epoxy D-MEC SCR740
0
CompareTechnical Data Sheet
| physical property | Test Condition | Test Method | Test Result |
|---|---|---|---|
| density | 1.13 g/cm³ | ||
| Viscosity | 430 mPa·s |
| Supplementary Information | Test Condition | Test Method | Test Result |
|---|---|---|---|
| CriticalExposure | 16.0 mJ/cm² | ||
| Puncture Strength | 120.0 µm |
| Mechanical properties | Test Condition | Test Method | Test Result |
|---|---|---|---|
| Tensile modulus | 3000 MPa | ||
| tensile strength | 62.0 MPa | ||
| elongation | Break | 3.0 % | |
| Flexural modulus | 2800 MPa | ||
| bending strength | 110 MPa |
| Impact resistance | Test Condition | Test Method | Test Result |
|---|---|---|---|
| Suspended wall beam without notch impact strength | 29 J/m |
| Thermal performance | Test Condition | Test Method | Test Result |
|---|---|---|---|
| Heat distortion temperature | 100 °C | ||
| Glass Transition Temperature | 135 °C |
IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.
Contact Us
Get App
Top