PC G4F23R DSM USA

Form：Granules | Grade：Injection grade

Properties:

Flame retardantheat-resistingGlass fiber reinforcedinjection molding 20% glass fiber reinforceFlame retardant grade

Supplier(1)

Product Description

Certificates(0)

Datasheet

Product Description

Properties:

Certificates

No Data...

Technical Data Sheet

Other performance	Test Condition	Test Method	Test Result	Test Unit
Extreme Oxygen Index		ISO 4589-1	33	%
mechanical properties	Test Condition	Test Method	Test Result	Test Unit
elongation at yield		ISO 527-1	4.0	%
tensile strength	Yield	ISO 527-1	14000	psi
Tensile modulus		ISO 527-1	870000	psi
thermal performance	Test Condition	Test Method	Test Result	Test Unit
Mold temperature		ISO 10724	212	℉
Melting temperature		ISO 294	572	℉
UL flame retardant rating	1.6mm	ISO 1210	V-0
Vicat softening temperature		ISO 306	302	℉
Hot deformation temperature	HDT	ISO 75-1	297	℉
Physical properties	Test Condition	Test Method	Test Result	Test Unit
density		ISO 1183	0.0488	Ib/int
Water absorption rate		ISO 62	0.29	%
melt mass-flow rate		ISO 1133	0.366	Int/10min
Electrical performance	Test Condition	Test Method	Test Result	Test Unit
Compared to the Leakage Traceability Index (CTI)		IEC 60112	200
Dielectric strength		IEC 60243-1	740	v/mil
Volume resistivity		IEC 60093	＞3.9E14	Ω.in
Dissipation factor	1MHz	IEC 60250	0.009
Dissipation factor	Dissipation factor	100Hz	IEC 60250	0.0009
Dielectric constant	1MHz	IEC 60250	3.20
Dielectric constant	Dielectric constant	100Hz	IEC 60250	3.25

IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.

Get App

Top