PC TRIREX® 3025GRU30 BK SAMYANG KOREA
10
- Usages:Office supplies
Technical Data Sheet
| mechanical properties | Test Condition | Test Method | Test Result |
|---|---|---|---|
| tensile strength | 23°C | ASTM D638 | 49 Mpa |
| Elongation at Break | 23°C | ASTM D638 | 4.0 % |
| bending strength | 23°C | ASTM D790 | 98.1 Mpa |
| Bending modulus | 23°C | ASTM D790 | 3430 Mpa |
| Impact strength of cantilever beam gap | 23°C | ASTM D256 | 49 J/m |
| thermal performance | Test Condition | Test Method | Test Result |
|---|---|---|---|
| Hot deformation temperature | 0.45MPaUnannealed | ASTM D648 | 150 °C |
| 1.80MPaUnannealed | ASTM D648 | 144 °C | |
| Linear coefficient of thermal expansion | MD | ASTM D696 | 1.9E-05 cm/cm/°C |
| Physical properties | Test Condition | Test Method | Test Result |
|---|---|---|---|
| Shrinkage rate | MD2.0mm | ASTM D995 | 0.40 % |
| Water absorption rate | (23°C,24hr) | ASTM D570 | 0.12 % |
| melt mass-flow rate | 300℃/1.2Kg | ASTM D1238 | 25 g/10min |
| Electrical performance | Test Condition | Test Method | Test Result |
|---|---|---|---|
| Volume resistivity | ASTM D257 | 4E+16 Ω.cm | |
| Dielectric strength | ASTM D149 | 31 KV/mm | |
| Dielectric constant | 23°C | ASTM D150 | 3.29 1MHz |
| Dissipation factor | 23°C | ASTM D150 | 9.7E-03 1MHz |
| 耐电弧性 | ASTM D495 | 120 S |
| hardness | Test Condition | Test Method | Test Result |
|---|---|---|---|
| Rockwell hardness | ASTM D785 | 122 R |
| flame retardant performance | Test Condition | Test Method | Test Result |
|---|---|---|---|
| UL flame retardant rating | UL -94 | V-0 1.50mm | |
| UL -94 | V-0 3.00mm | ||
| UL -94 | V-0 6.00mm |
IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.