Technical Data Sheet
| physical property | Test Condition | Test Method | Test Result |
|---|
| density | | ASTMD792 | 1.20 g/cm³ |
| Shrinkage rate | | ASTMD955 | 0.40到0.80 % |
| water content | | | 0.020 % |
| flammability | Test Condition | Test Method | Test Result |
|---|
| UL flame retardant rating | | UL94 | HB |
| Supplementary Information | Test Condition | Test Method | Test Result |
|---|
| Renewable Content | | | 32 % |
| Impact resistance | Test Condition | Test Method | Test Result |
|---|
| Suspended wall beam without notch impact strength | | ASTMD4812 | 无断裂 |
| Impact strength of cantilever beam gap | | ASTMD256 | 690 J/m |
| Mechanical properties | Test Condition | Test Method | Test Result |
|---|
| tensile strength | | ASTMD638 | 51.7 MPa |
| elongation | Yield | ASTMD638 | >10 % |
| Flexural modulus | | ASTMD790 | 2550 MPa |
| bending strength | | ASTMD790 | 86.2 MPa |
| Thermal performance | Test Condition | Test Method | Test Result |
|---|
| | ASTMD648 | 124 °C |
| | ASTMD648 | 68.3 °C |
IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.
Compare