PPO XYRON™ 240Z ASAHI JAPAN

Properties:
Chemical resistance
Low temperature resistanc
Usages:
Fitness equipment
Sports Equipment
Compare
View Prices

Technical Data Sheet

physical property	Test Condition	Test Method	Test Result	Unit
Shrinkage rate	2.00mm	内部方法	0.50to0.70	%
Water absorption rate	23°C,24hr	ISO62	0.10	%
Outdoor applicability	Black	UL746C	f1

Mechanical performance	Test Condition	Test Method	Test Result	Unit
tensile strength	屈服,23°C	ISO527-2	49.0	Mpa
Nominal tensile fracture strain	23°C	ISO527-2	10	%
Bending modulus	23°C	ISO178	2300	Mpa
bending strength	23°C	ISO178	80.0	Mpa
Impact strength of simply supported beam gap	23°C	ISO179	15	kJ/m²

Thermal performance	Test Condition	Test Method	Test Result	Unit
Hot deformation temperature	1.8MPa,未退火	ASTMD648	90.0	°C
Hot deformation temperature	Hot deformation temperature	1.8MPa,未退火	ISO75-2/A	83.0	°C
Linear coefficient of thermal expansion	MD：-30到65°C	ISO11359-2	7.5E-05	cm/cm/°C

Electrical performance	Test Condition	Test Method	Test Result	Unit
Surface resistivity		IEC60093	1E+16	ohms
Volume resistivity	23°C	IEC60093	1E+16	ohms·cm
Dielectric strength	2.00mm	IEC60243-1	29	KV/mm
Dielectric constant	100Hz	IEC60250	2.90
Dielectric constant	Dielectric constant	1MHz	IEC60250	2.90
Dissipation factor	100Hz	IEC60250	3E-03
Dissipation factor	Dissipation factor	1MHz	IEC60250	4E-03

flammability	Test Condition	Test Method	Test Result	Unit
UL flame retardant rating	1.5mm	UL94	V-0
UL flame retardant rating	UL flame retardant rating	2.5mm	UL94	5VA

IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.

PPO XYRON™ 240Z ASAHI JAPAN

Technical Data Sheet

You May Like