PBT GP-2306F LG CHEM KOREA

Form：Granules | Grade：Injection grade

Properties:

Flame retardantGlass fiber reinforced

Typical Applications:

Electronic fieldElectrical fieldElectrical componentsElectrical/Electronic Applications

Supplier(1)

Product Description

Certificates(1)

Datasheet

Product Description

Typical Applications:	Electronic field \| Electrical field \| Electrical components \| Electrical/Electronic Applications
Properties:	Flame retardant \| Glass fiber reinforced

Certificates

Technical Data Sheet

impact performance	Test Condition	Test Method	Test Result	Test Unit
Impact strength of cantilever beam gap	23°C,6.40mm	ASTM D256	69	J/m
flammability	Test Condition	Test Method	Test Result	Test Unit
UL flame retardant rating	3.3mm	UL 94	V-0
	UL flame retardant rating	1.5mm	UL 94	V-0
	UL flame retardant rating	UL flame retardant rating	0.71mm	UL 94	V-0
mechanical properties	Test Condition	Test Method	Test Result	Test Unit
bending strength	Yield,3.20mm	ASTM D790	191	Mpa
Bending modulus	3.20mm	ASTM D790	8830	Mpa
elongation	Break,3.20mm	ASTM D638	2.0	%
tensile strength	Break,3.20mm	ASTM D638	132	Mpa
thermal performance	Test Condition	Test Method	Test Result	Test Unit
RTI		UL 746	140	°C
RTI Imp		UL 746	140	°C
RTI Elec		UL 746	140	°C
Melting temperature		ASTM D3418	223	°C
Hot deformation temperature	1.8MPa,Unannealed,6.40mm	ASTM D648	210	°C
Physical properties	Test Condition	Test Method	Test Result	Test Unit
Water absorption rate	23°C,24hr	ASTM D570	0.070	%
Shrinkage rate	MD	ASTM D955	0.30-1.0	%
melt mass-flow rate	250°C/2.16kg	ASTM D1238	10	g/10min
density		ASTM D792	1.62	g/cm³
Electrical performance	Test Condition	Test Method	Test Result	Test Unit
Arc resistance		ASTM D495	PLC6
Dielectric strength	1.00mm	ASTM D149	28	KV/mm
Volume resistivity		ASTM D257	1E+17	ohms·cm

IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.

Get App

Top