
Product Description
Certificates(0)
Datasheet
Product Description
Certificates
No Data...
Technical Data Sheet
| impact performance | Test Condition | Test Method | Test Result | Test Unit |
|---|---|---|---|---|
| Impact strength of simply supported beam without notch | 23°C | ISO 179/1eU | NoBreak | |
| flammability | Test Condition | Test Method | Test Result | Test Unit |
| FMVSS flammability | FMVSS302 | B | ||
| Burning rate | 1.00mm | ISO 3795 | <100 | mm/min |
| mechanical properties | Test Condition | Test Method | Test Result | Test Unit |
| bending strength | ISO 178 | 86.0 | Mpa | |
| Bending modulus | ISO 178 | 1900 | Mpa | |
| Tensile modulus | ISO 527-2 | 2300 | Mpa | |
| thermal performance | Test Condition | Test Method | Test Result | Test Unit |
| Melting temperature | ISO 11357-3 | 225 | °C | |
| Hot deformation temperature | 1.8MPa,Unannealed | ISO 75-2/A | 54.0 | °C |
| 0.45MPa,Unannealed | ISO 75-2/B | 151 | °C | |
| Physical properties | Test Condition | Test Method | Test Result | Test Unit |
| Stickiness | 96%H2SO4 | ISO 307 | 170 | cm³/g |
| Water absorption rate | Equilibrium,23°C,2.00mm,50%RH | ISO 62 | 1.4 | % |
| Saturation,23°C,2.00mm | ISO 62 | 3.3 | % | |
| 23°C,24hr | ISO 62 | 0.58 | % | |
| Shrinkage rate | MD | ISO 294-4 | 1.2 | % |
| TD | ISO 294-4 | 1.2 | % |
IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.