
PP H1500 HYUNDAI KOREA
63
Form:Granules | Grade:Injection grade
Properties:
High mobility
Typical Applications:
Lighting fixtures
Product Description
Certificates(0)
Datasheet
Alternative(4)
Product Description
| Typical Applications: | Lighting fixtures |
| Properties: | High mobility |
Certificates
No Data...
Technical Data Sheet
| mechanical properties | Test Condition | Test Method | Test Result | Test Unit |
|---|---|---|---|---|
| Impact strength of cantilever beam gap | 23°C | ASTM D256 | 29 | J/m |
| Bending modulus | 23°C | ASTM D790 | 1470 | Mpa |
| Elongation at Break | 23°C | ASTM D638 | 100 | % |
| tensile strength | 23°C | ASTM D638 | 34.3 | Mpa |
| thermal performance | Test Condition | Test Method | Test Result | Test Unit |
| Hot deformation temperature | 0.45MPaUnannealed | ASTM D648 | 115 | °C |
| Physical properties | Test Condition | Test Method | Test Result | Test Unit |
| melt mass-flow rate | 230℃/2.16Kg | ASTM D1238 | 12 | g/10min |
| density | ASTM D792 | 0.90 | g/cm³ | |
| flame retardant performance | Test Condition | Test Method | Test Result | Test Unit |
| UL flame retardant rating | UL -94 | HB | 1.50mm |
IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.