Technical Data Sheet
| physical property | Test Condition | Test Method | Test Result |
|---|
| density | | ASTMD792 | 1.37 g/cm³ |
| Water absorption rate | | ASTMD570 | 0.70 % |
| optical performance | Test Condition | Test Method | Test Result |
|---|
| refractive index | | | 1.650 |
| transmissivity | | | 91.0 % |
| flammability | Test Condition | Test Method | Test Result |
|---|
| Limiting Oxygen Index | | ASTMD2863 | 38 % |
| Supplementary Information | Test Condition | Test Method | Test Result |
|---|
| Temperature | | | 270到280 °C |
| Tear strength - pro | | ASTMD1004 | 37.1 kN/m |
| film | Test Condition | Test Method | Test Result |
|---|
| tensile strength | Yield | ASTMD882 | 72.4 MPa |
| elongation | Break | ASTMD882 | 52 % |
| | ASTMD790 | 2550 MPa |
| Area coefficient | | | 20000 in²/lb/mil |
| Electrical performance | Test Condition | Test Method | Test Result |
|---|
| Surface Resistivity | | ASTMD257 | >1.0E+14 ohms |
| dielectric strength | | ASTMD149 | 180 kV/mm |
| dielectric constant | | ASTMD150 | 3.50 |
| Dissipation Factor | | ASTMD150 | 0.011 |
| Thermal performance | Test Condition | Test Method | Test Result |
|---|
| | ASTMD648 | 195 °C |
| Continuous use temperature | | | 180 °C |
| Glass Transition Temperature | | ASTMD3418 | 225 °C |
IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.
Compare