PC 8310-10 STYRON US

Form：Granules | Grade：Blow molding grade

Supplier(0)

Product Description

Certificates(0)

Datasheet

Product Description

Certificates

No Data...

Technical Data Sheet

optical performance	Test Condition	Test Method	Test Result	Test Unit
transmissivity		ASTM D1003	87.0to91.0	%
other	Test Condition	Test Method	Test Result	Test Unit
characteristic			防火
Color			透明
purpose			IT办公
flammability	Test Condition	Test Method	Test Result	Test Unit
UL flame retardant rating	1.5mm	UL 94	V-2
	UL flame retardant rating	2.5mm	UL 94	V-0
	UL flame retardant rating	UL flame retardant rating	3.0mm	UL 94	V-0
Burning wire flammability index	1.0mm	IEC 60695-2-12	960	°C
	Burning wire flammability index	2.0mm	IEC 60695-2-12	960	°C
	Burning wire flammability index	Burning wire flammability index	3.0mm	IEC 60695-2-12	960	°C
Ignition temperature of heating wire	1.0mm	IEC 60695-2-13	800	°C
	Ignition temperature of heating wire	2.0mm	IEC 60695-2-13	800	°C
	Ignition temperature of heating wire	Ignition temperature of heating wire	3.0mm	IEC 60695-2-13	800	°C
Limiting Oxygen Index (LOI)		ISO 4589-2	40	%
UL flame retardant rating	1.50mm	ohm·cm	PASS
mechanical properties	Test Condition	Test Method	Test Result	Test Unit
Tensile strain	Yield	ISO 527-2/50	6.0	%
Tensile strain	Tensile strain	Break	ISO 527-2/50	>100	%
Bending modulus		ISO 178	2350	Mpa
bending strength		ISO 178	95.0	Mpa
Tensile modulus		ISO 527-2/1	2400	Mpa
tensile strength	Yield	ISO 527-2/50	60.0	Mpa
tensile strength	tensile strength	Break	ISO 527-2/50	58.0	Mpa
thermal performance	Test Condition	Test Method	Test Result	Test Unit
Hot deformation temperature	0.45MPa,Annealed	ISO 75-2/B	142	°C
	Hot deformation temperature	1.8MPa,Unannealed	ISO 75-2/A	123	°C
	Hot deformation temperature	Hot deformation temperature	1.8MPa,Annealed	ISO 75-2/A	139	°C
Vicat softening temperature		ISO 306/B50	143	°C
Ball pressure temperature		IEC 60335-1	>125	°C
Linear coefficient of thermal expansion	MD	ISO 11359-2	7E-05	cm/cm/°C
Physical properties	Test Condition	Test Method	Test Result	Test Unit
melt mass-flow rate	300°C/1.2kg	ISO 1133	10	g/10min
Shrinkage rate		ISO 294-4	0.50-0.70	%
Electrical performance	Test Condition	Test Method	Test Result	Test Unit
Surface resistivity		IEC 60093	>1.0E+15	ohms
Volume resistivity		IEC 60093	>1.0E+15	ohms·cm
Dielectric strength		IEC 60243-1	17	KV/mm
Dielectric constant	1Hz	IEC 60250	2.70
Dielectric constant	Dielectric constant	50Hz	IEC 60250	2.70
Dissipation factor	1Hz	IEC 60250	1E-03
Dissipation factor	Dissipation factor	50Hz	IEC 60250	1E-03

IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.

Get App

Top