ABS 1.5E+01 Hongyun Polymer
0
- Properties:The detection conditions for melt mass flow rate are 220 ℃10kg loadand good comprehensive flame retardant performance
- Usages:Suitable for various flame-retardant electronic accessoriescommunication equipmentand automotive accessories
CompareTechnical Data Sheet
| physical property | Test Condition | Test Method | Test Result |
|---|---|---|---|
| melt mass-flow rate | GB/T2410 | 45.0 g/10min |
| Mechanical properties | Test Condition | Test Method | Test Result |
|---|---|---|---|
| Tensile stress | GB/T1040 | 42.1 MPa | |
| GB/T1040 | 36.9 MPa | ||
| Tensile strain | GB/T1040 | 7.7 % | |
| Flexural modulus | GB/T9341 | 2.29 GPa | |
| Impact strength of cantilever beam gap | GB/T1843 | 8.9 KJ/m2 | |
| bending strength | GB/T9341 | 58.1 MPa |
| Thermal performance | Test Condition | Test Method | Test Result |
|---|---|---|---|
| Heat distortion temperature | GB/T1634 | 94.0 ℃ | |
| UL flame retardant rating | UL 94 | V-0 |
IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.
Contact Us
Get App
Top