Share
Add to compare

PC 8110-6 STYRON US

7

Form:Granules

Properties:
enhance
Typical Applications:
Automotive sector
Product Description
Certificates(0)
Datasheet

Product Description

Typical Applications:Automotive sector
Properties:enhance

Certificates

No Data...

Technical Data Sheet

flammabilityTest ConditionTest MethodTest ResultTest Unit
UL flame retardant rating1.0mmUL 94V-0
UL flame retardant rating2.0mmUL 94V-0
UL flame retardant rating3.0mmUL 94V-0
Burning wire flammability index1.0mm3IEC 60695-2-12960°C
Burning wire flammability index2.0mm4IEC 60695-2-12960°C
Burning wire flammability index3.0mm4IEC 60695-2-12960°C
Hot filament ignition temperature1.0mmIEC 60695-2-13850°C
Hot filament ignition temperature2.0mmIEC 60695-2-13850°C
Hot filament ignition temperature3.0mmIEC 60695-2-13850°C
Extreme Oxygen IndexISO 4589-237%
mechanical propertiesTest ConditionTest MethodTest ResultTest Unit
Tensile modulusISO 527-22400Mpa
tensile strengthYieldISO 527-260.0Mpa
tensile strengthBreakISO 527-270.0Mpa
Tensile strainYieldISO 527-26.0%
Tensile strainBreakISO 527-2110%
Bending modulusISO 1782350Mpa
bending strengthISO 17895.0Mpa
thermal performanceTest ConditionTest MethodTest ResultTest Unit
Hot deformation temperature0.45MPa,AnnealedISO 75-2/B144°C
Hot deformation temperature1.8MPa,UnannealedISO 75-2/A125°C
Hot deformation temperature1.8MPa,AnnealedISO 75-2/A141°C
Vicat softening temperatureISO 306/B50146°C
Ball pressure temperatureIEC 60335-1>125°C
Linear coefficient of thermal expansionMDISO 11359-27E-05cm/cm/°C
Physical propertiesTest ConditionTest MethodTest ResultTest Unit
melt mass-flow rate300°C/1.2kgISO 113310g/10min
Shrinkage rateISO 294-40.50-0.70%
Electrical performanceTest ConditionTest MethodTest ResultTest Unit
Volume resistivityIEC 60093>1.0E+15ohms·cm
Dielectric strengthIEC 60243-117KV/mm
Dielectric constant1HzIEC 602502.70
Dielectric constant50HzIEC 602502.70
Dissipation factor1HzIEC 602501E-03
Dissipation factor50HzIEC 602501E-03
Compared to the anti leakage trace indexSolutionAIEC 60112PLC 3
Surface resistivityIEC 60093>1.0E+15ohms
IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.