Technical Data Sheet
| physical property | Test Condition | Test Method | Test Result | Unit |
|---|
| Shrinkage rate | TD:3.00mm2 | 内部方法 | 0.71 | % |
| Shrinkage rate | MD:3.00mm4 | 内部方法 | 0.22 | % |
| Water absorption rate | 23°C,24hr | ISO62 | 0.020 | % |
| Mechanical performance | Test Condition | Test Method | Test Result | Unit |
|---|
| tensile strength | 屈服,23°C | ISO527-2 | 140 | Mpa |
| elongation | 断裂,23°C | ISO527-2 | 0.90 | % |
| Bending modulus | 23°C | ISO178 | 19000 | Mpa |
| bending strength | 23°C | ISO178 | 220 | Mpa |
| shear strength | 23°C | JISK7214 | 60.0 | Mpa |
| Friction coefficient | | | 0.28 | |
| Taber abraser | 1000Cycles | ISO9352 | 70.0 | mg |
| Impact strength of simply supported beam without notch | 23°C | ISO179 | 19 | kJ/m² |
| Rockwell hardness | R级 | ISO2039-2 | 122 | |
| Thermal performance | Test Condition | Test Method | Test Result | Unit |
|---|
| Hot deformation temperature | 1.8MPa,未退火 | ISO75-2/A | 260 | °C |
| Melting temperature | | ISO11357-3 | 278 | °C |
| Linear coefficient of thermal expansion | MD | ISO11359-2 | 1.8E-05 | cm/cm/°C |
| Linear coefficient of thermal expansion | TD | ISO11359-2 | 2.8E-05 | cm/cm/°C |
| Electrical performance | Test Condition | Test Method | Test Result | Unit |
|---|
| Volume resistivity | | IEC60093 | 1E+16 | ohms·cm |
| Dielectric strength | | IEC60243-1 | 24 | KV/mm |
| Dielectric constant | 23°C,1MHz | IEC60250 | 4.90 | |
| Dissipation factor | 23°C,1MHz | IEC60250 | 2E-03 | |
| flammability | Test Condition | Test Method | Test Result | Unit |
|---|
| UL flame retardant rating | 0.70mm | UL94 | V-0 | |
| Supplementary Information | Test Condition | Test Method | Test Result | Unit |
|---|
| BarFlowLength | 320°C,1.00mm | 内部方法 | 135 | mm |
IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.
Compare
View Prices