TPEE LONGLITE® TPEE 1172LL Chang Chun Plastics Co., Ltd. (CCP Group)

Product Description

Certificates(0)

Datasheet

Product Description

Certificates

No Data...

Technical Data Sheet

impact performance	Test Condition	Test Method	Test Result	Test Unit
Charpy Notched Impact Strength		ISO 179/1eA	14	kJ/m²
mechanical properties	Test Condition	Test Method	Test Result	Test Unit
Tensile modulus		ISO 527-2	854	MPa
tensile strength	Yield	ISO 527-2	40.0	MPa
Tensile strain	Break	ISO 527-2	240	%
Bending modulus		ISO 178	290	MPa
thermal performance	Test Condition	Test Method	Test Result	Test Unit
Melting temperature		ISO 3146	218	°C
Physical properties	Test Condition	Test Method	Test Result	Test Unit
Shrinkage rate		ISO 294-4	1.0	%
Water absorption rate	23°C,24hr	ISO 62	0.30	%
density		ISO 1183	1.28	g/cm³
melt mass-flow rate	230°C/2.16kg	ISO 1133	30	g/10min
Electrical performance	Test Condition	Test Method	Test Result	Test Unit
Surface resistivity		IEC 60093	9E+13	ohms
Volume resistivity		IEC 60093	1.3E+16	ohms·cm
Dielectric strength	2.00mm	IEC 60243-1	18	kV/mm
hardness	Test Condition	Test Method	Test Result	Test Unit
Shore hardness	ShoreD	ISO 868	72

IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.

Get App

Top