Technical Data Sheet
| physical property | Test Condition | Test Method | Test Result |
|---|
| density | | ISO 1183 | 1.45 g/cm³ |
| flammability | Test Condition | Test Method | Test Result |
|---|
| UL flame retardant rating | | UL 94 | V-0 |
| UL flame retardant rating | | UL 94 | V-0 |
| Burning wire flammability index | | IEC 60695-2-12 | 850 °C |
| Mechanical properties | Test Condition | Test Method | Test Result |
|---|
| Tensile strain | | ISO 527-2/5 | 2.4 % |
| Tensile modulus | | ISO 527-2/1 | 10500 MPa |
| tensile strength | | ISO 527-2/5 | 215 MPa |
| Impact resistance | Test Condition | Test Method | Test Result |
|---|
| Charpy Notched Impact Strength | | ISO 179/1eA | 8.0 kJ/m² |
| Impact strength of simply supported beam without notch | | ISO 179/1eU | 55 kJ/m² |
| Electrical performance | Test Condition | Test Method | Test Result |
|---|
| Compared to the Leakage Tracking Index (CTI) | | UL 746 | PLC 0 |
| Thermal performance | Test Condition | Test Method | Test Result |
|---|
| Heat distortion temperature | | ISO 75-2/B | 285 °C |
| Heat distortion temperature | | ISO 75-2/A | 270 °C |
| melting temperature | | ISO 3146 | 313 °C |
| Linear coefficient of thermal expansion | | DIN 53752 | 3E-05 cm/cm/°C |
| Linear coefficient of thermal expansion | | DIN 53752 | 7E-05 cm/cm/°C |
| maximum service temperature | | IEC 60216 | 270 °C |
| maximum service temperature | | IEC 60216 | 160 °C |
IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.
Compare