Share
Add to compare

Epoxy 377 Epoxy Technology Inc.

Typical Applications:
Electrical and electronic applications optical applications seals medical and nursing supplies adhesives
Product Description
Certificates(0)
Datasheet

Product Description

Typical Applications:Electrical and electronic applications | optical applications | seals | medical and nursing supplies | adhesives

Certificates

No Data...

Technical Data Sheet

Cured PropertiesTest ConditionTest MethodTest ResultTest Unit
Shore hardnessShoreD67
LapShearStrength23°C10.0MPa
Relative permittivity1kHz3.36
Volume resistivity23°C>1.0E+13ohms·cm
Dissipation factor1kHz5E-03
Uncured PropertiesTest ConditionTest MethodTest ResultTest Unit
Color--6Amber
densityPartA1.15g/cm³
Color--7Clear/Transparent
density固化时间(150°C)1.0hr
density粘度8(23°C)0.15to0.30Pa·s
densityPartB1.22g/cm³
densityPot Life1400min
optical performanceTest ConditionTest MethodTest ResultTest Unit
transmissivity1000to6800nm>98.0%
transmissivity600to1000nm>90.0%
Refractive index1.520
thermosettingTest ConditionTest MethodTest ResultTest Unit
Thermosetting componentsShelf Life(23°C)52wk
Thermosetting componentsPartB按重量计算的混合比:1.0
Thermosetting componentsPartA按重量计算的混合比:1.0
thermal performanceTest ConditionTest MethodTest ResultTest Unit
Linear coefficient of thermal expansionMD:--42.1E-04cm/cm/°C
Glass transition temperature>95.0°C
Linear coefficient of thermal expansionMD:--35.7E-05cm/cm/°C
Physical propertiesTest ConditionTest MethodTest ResultTest Unit
Ionic typeNa+15ppm
Ionic typeK+3ppm
Ionic typeCl-26ppm
Ionic typeNH4+22ppm
Supplementary InformationTest ConditionTest MethodTest ResultTest Unit
weight loss on heating300°C0.50%
weight loss on heating250°C0.17%
weight loss on heating200°C0.060%
StorageModulus2.58GPa
operate temperature间歇<300°C
Shear Strength23°C23.4MPa
DegradationTemperature375°C
IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.