ASA+PA SCHULABLEND® (ASA/PA) M/MW 6201 MT

Properties:
Thermal performance
Compare

Technical Data Sheet

	Test Condition	Test Method	Test Result
Heat distortion temperature		ISO 75-2/Af	78.0 °C
vicat		ISO 306/A50	184 °C
vicat	vicat		ISO 306/B50	110 °C
burning rate		ISO 3795	30 mm/min
UL flame retardant rating		IEC 60695-11-10,-20	HB
density		ISO 1183/A	1.18 g/cm³
Melt volume flow rate		ISO 1133	6.00 cm³/10min
Tensile modulus		ISO 527-2/1A/1	3100 MPa
tensile strength	Yield	ISO 527-2/1A/50	51.0 MPa
Tensile strain	Yield	ISO 527-2/1A/50	3.1 %
Charpy Notched Impact Strength		ISO 179/1eA	4.0 kJ/m²
UL flame retardant rating		IEC 60695-11-10,-20	HB
Burning wire flammability index		IEC 60695-2-12	675 °C
Burning wire flammability index	Burning wire flammability index		IEC 60695-2-12	675 °C
Hot filament ignition temperature		IEC 60695-2-13	700 °C
Hot filament ignition temperature	Hot filament ignition temperature		IEC 60695-2-13	700 °C
Charpy Notched Impact Strength		ISO 179/1eA	10 kJ/m²
Impact strength of simply supported beam without notch		ISO 179/1eU	75 kJ/m²
Impact strength of simply supported beam without notch	Impact strength of simply supported beam without notch		ISO 179/1eU	NoBreak
ball-indentation hardness		ISO 2039-1	101 MPa
Heat distortion temperature		ISO 75-2/Bf	96.0 °C

IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.

Get App

Top