PET/PBT 9KL22115 H
0
- Properties:Fillerreinforcing materialglass fiber reinforced material15%filler by weight additivethermal stabilizer characteristicsthermal stability
CompareTechnical Data Sheet
| physical property | Test Condition | Test Method | Test Result |
|---|---|---|---|
| Water absorption rate | ISO 62 | 0.20 % | |
| Mechanical properties | ISO 527-2/5 | 7500 MPa | |
| Tensile stress | ISO 527-2/5 | 100 MPa | |
| Tensile strain | ISO 527-2/5 | 3.0 % | |
| Impact strength of cantilever beam gap | ISO 180/1A | 5.0 kJ/m² | |
| ISO 180/1U | 35.0 kJ/m² |
| other | Test Condition | Test Method | Test Result |
|---|---|---|---|
| UL flame retardant rating | UL 94 | HB | |
| UL 94 | HB | ||
| Hot filament ignition temperature | IEC 60695-2-13 | 960 °C |
| Electrical performance | Test Condition | Test Method | Test Result |
|---|---|---|---|
| Surface Resistivity | IEC 60093 | 1E+14 ohms | |
| Volume resistivity | IEC 60093 | 1E+16 ohms·cm |
| Thermal performance | Test Condition | Test Method | Test Result |
|---|---|---|---|
| ISO 75-2/B | 210 °C | ||
| ISO 75-2/A | 175 | ||
| melting temperature | ISO 11357 | 255 °C |
IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.
Contact Us
Get App
Top