TPU R175A
5
- Properties:Plasticizer
CompareTechnical Data Sheet
| physical property | Test Condition | Test Method | Test Result |
|---|---|---|---|
| Shrinkage rate | ASTM D-955 | 1.0 % | |
| durometer hardness | ASTM D-2240 | 82 | |
| Shrinkage rate | ASTM D-955 | 1.0 % | |
| Supporting hardness | ASTM D-2240 | 82 |
| Performance project | Test Condition | Test Method | Test Result |
|---|---|---|---|
| Test conditions [status] | 测试数据 | 数据单位 |
| Mechanical properties | Test Condition | Test Method | Test Result |
|---|---|---|---|
| Tensile stress | ASTM D-412 | 4.61 Mpa | |
| ISO 3146 | MPa | ||
| ≤2 | MPa | ||
| elongation | kgfcm/cm | % | |
| tear strength | ASTM D-624 | 80000 kN/m | |
| Compression group | ASTM D-395 | 15 % | |
| Wear amount | ISO 4649 | 35.0 mm³ | |
| Tensile stress | ASTM D-412 | 29.4 Mpa | |
| elongation | ASTM D-412 | 800 % | |
| tear strength | ASTM D-624 | 78.5 kN/m | |
| compression set | ASTM D-395 | 15 % |
| Thermal performance | Test Condition | Test Method | Test Result |
|---|---|---|---|
| vicat | ASTM D-1525 | 78 °C | |
| ASTM D-1525 | 78.0 °C |
IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.
Contact Us
Get App
Top