PA66 Alloy Strator® C-4 SOLVAY BELGIUM

Properties:
Filler
long glass fiber
40%
filler by weight
Compare

Technical Data Sheet

physical property	Test Method	Test Result
density	ISO 1183	1.50 g/cm³
Shrinkage rate	内部方法	0.30 %
Water absorption rate	ISO 62	1.5 %

Mechanical properties	Test Condition	Test Method	Test Result
Tensile modulus		ISO 527-2	13000 MPa
	Tensile modulus		ISO 527-2	8800 MPa
	Tensile modulus	Tensile modulus		ISO 527-2	7800 MPa
tensile strength		ISO 527-2	220 MPa
	tensile strength		ISO 527-2	145 MPa
	tensile strength	tensile strength		ISO 527-2	125 MPa
Tensile strain	Break	ISO 527-2	2.2 %
Flexural modulus		ISO 178	10900 MPa
bending strength		ISO 178	330 MPa

Impact resistance	Test Condition	Test Method	Test Result
Charpy Notched Impact Strength		ISO 179	30 kJ/m²
Impact strength of simply supported beam without notch		ISO 179	70 kJ/m²

Electrical performance	Test Method	Test Result
Compared to the Leakage Tracking Index (CTI)	IEC 60112	PLC 1
dielectric strength	IEC 60243-1	35 kV/mm
Surface Resistivity	ASTM D257	1E+12 ohms

Thermal performance	Test Method	Test Result
Heat distortion temperature	ISO 75-2/A	237 °C
Linear coefficient of thermal expansion	ISO 7991	2.3E-05 cm/cm/°C
thermal conductivity	ISO 22007	0.33 W/m/K
Heat distortion temperature	ISO 75-2/B	245 °C

IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.

Get App

Top