PA66 A 218 W V30 SOLVAY KOREA

Form：Granules | Grade：Enhanced level

Properties:

Filler: Glass fiber reinf30% filler by weight

Typical Applications:

Pipeline componentsNon specific food applicationsElectrical appliances

Supplier(1)

Product Description

Certificates(0)

Datasheet

Product Description

Typical Applications:	Pipeline components \| Non specific food applications \| Electrical appliances
Properties:	Filler: Glass fiber reinf \| 30% filler by weight

Certificates

No Data...

Technical Data Sheet

impact performance	Test Condition	Test Method	Test Result	Test Unit
Impact strength of simply supported beam without notch	23°C	ISO 179/1eU	85	kJ/m²
Suspended wall beam without notch impact strength	23°C	ASTM D256	95.0	kJ/m²
Suspended wall beam without notch impact strength	Suspended wall beam without notch impact strength	23°C	ISO 180/1U	75	kJ/m²
flammability	Test Condition	Test Method	Test Result	Test Unit
UL flame retardant rating	1.6mm	UL 94	HB
UL flame retardant rating	UL flame retardant rating	3.2mm	UL 94	HB
Burning wire flammability index	1.6mm	IEC 60695-2-12	700	°C
mechanical properties	Test Condition	Test Method	Test Result	Test Unit
bending strength	23°C	ISO 178	275	Mpa
Tensile modulus	23°C	ISO 527-2/1A	10000	Mpa
tensile strength	Yield,23°C	ASTM D638	190	Mpa
tensile strength	tensile strength	Break,23°C	ISO 527-2/1A	190	Mpa
elongation	Break,23°C	ASTM D638	3.5	%
Tensile strain	Break,23°C	ISO 527-2	3.0	%
Bending modulus	23°C	ASTM D790	9000	Mpa
Bending modulus	Bending modulus	23°C	ISO 178	9000	Mpa
bending strength	23°C	ASTM D790	270	Mpa
thermal performance	Test Condition	Test Method	Test Result	Test Unit
Hot deformation temperature	0.45MPa,Unannealed	ISO 75-2/Bf	260	°C
	Hot deformation temperature	1.8MPa,Unannealed	ASTM D648	250	°C
	Hot deformation temperature	Hot deformation temperature	1.8MPa,Unannealed	ISO 75-2/Af	255	°C
Melting temperature		ISO 11357-3	262	°C
Physical properties	Test Condition	Test Method	Test Result	Test Unit
Water absorption rate	23°C,24hr	ISO 62	0.80	%
Electrical performance	Test Condition	Test Method	Test Result	Test Unit
Surface resistivity		IEC 60093	1E+15	ohms
Volume resistivity		IEC 60093	1E+15	ohms·cm
Dielectric strength	2.00mm	IEC 60243-1	35	KV/mm
Relative permittivity		IEC 60250	3.70
Dissipation factor		IEC 60250	0.020
Compared to the anti leakage trace index	SolutionA	IEC 60112	PLC 0

IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.

Get App

Top