PA6 Modified Plastics MN6-FG10 SE BK
0
- Properties:Fillerglass fiber reinforced material10%filler by weight
CompareTechnical Data Sheet
| physical property | Test Condition | Test Method | Test Result |
|---|---|---|---|
| density | ASTM D792 | 1.50 g/cm³ | |
| Shrinkage rate | ASTM D955 | 0.30to0.70 % |
| flammability | Test Condition | Test Method | Test Result |
|---|---|---|---|
| UL flame retardant rating | UL 94 | V-0 |
| Mechanical properties | Test Condition | Test Method | Test Result |
|---|---|---|---|
| Tensile modulus | ASTM D638 | 5650to6890 MPa | |
| tensile strength | Yield | ASTM D638 | 75.8to89.6 MPa |
| elongation | Break | ASTM D638 | 2.0to4.0 % |
| Flexural modulus | ASTM D790 | 4140to5380 MPa | |
| bending strength | ASTM D790 | 123to138 MPa |
| Impact resistance | Test Condition | Test Method | Test Result |
|---|---|---|---|
| Impact strength of cantilever beam gap | ASTM D256 | 43to64 J/m |
IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.
Contact Us
Get App
Top