Technical Data Sheet
| physical property | Test Condition | Test Method | Test Result |
|---|
| Taber abraser | | ASTM D-1044 | 90 mg/1000rev |
| Taber abraser | | ASTM D-1044 | 2 mg/1000rev |
| Basic performance | Test Condition | Test Method | Test Result |
|---|
| Water absorption rate | | ASTM D-570 | 3 % |
| Other performance | Test Condition | Test Method | Test Result |
|---|
| bending strength | | ASTM D-1052 | >1×10 |
| melt mass-flow rate | | ASTM D-1238 | 5.0 g/10min |
| Mechanical properties | Test Condition | Test Method | Test Result |
|---|
| Shore hardness | | ASTM D-2240 | 30 |
| Rubbing modulus | | ASTM D-790 | 28 Mpa |
| Impact strength of cantilever beam gap | | ASTM D-256 | 不破裂 J/m |
| elongation at break | | ASTM D-638 | 26.2 Mpa |
| Initial tear strength | | ASTM D-1004 | 77 kN/m |
| elongation at break | | ASTM D-638 | 700 % |
| Electrical performance | Test Condition | Test Method | Test Result |
|---|
| tensile strength | | ASTM D-638 | 1.3 Mpa |
| tensile strength | | ASTM D-638 | 2.1 Mpa |
| Thermal performance | Test Condition | Test Method | Test Result |
|---|
| melting temperature | | ASTM D-3418 | 170 °C |
| Heat distortion temperature | | ASTM D-638 | 46 °C |
| vicat | | ASTM D-1525 | 83 °C |
| Heat distortion temperature | | ASTM D-638 | N/A °C |
IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.
Compare
View Prices