PCT Infino TK-2046HM LOTTE KOREA
0
- Properties:Fillersglass fiber reinforced materials
CompareTechnical Data Sheet
| thermal performance | Test Condition | Test Method | Test Result |
|---|---|---|---|
| Heat Deflection Temperature | 1.8MPa,未退火,6.40mm | ASTM D648 | 250 °C |
| 1.8MPa,Unannealed,4.00mm | ISO 75-2/A | 250 °C |
| optical performance | Test Condition | Test Method | Test Result |
|---|---|---|---|
| Yellowness Index | -- | ASTM D1925 | 4.0 YI |
| 3.20mm | ASTM D1925 | 4.0 YI |
| Physical properties | Test Condition | Test Method | Test Result |
|---|---|---|---|
| ash content | -- | ISO 3451 | 41 % |
| -- | ASTM D5630 | 41 % | |
| density | ASTM D792 | 1.61 g/cm³ | |
| ISO 1183 | 1.61 g/cm³ | ||
| melt mass-flow rate | 300°C/1.2kg | ASTM D1238 | 20 g/10min |
| 300°C/1.2kg | ISO 1133 | 20 g/10min |
| mechanical properties | Test Condition | Test Method | Test Result |
|---|---|---|---|
| elongation | Break | ASTM D638 | 1.5 % |
| Tensile strain | Break | ISO 527-2/5 | 1.5 % |
| tensile strength | Yield | ASTM D638 | 61.0 MPa |
| Yield | ISO 527-2/5 | 620 MPa | |
| flexural modulus | ASTM D790 | 7600 MPa | |
| ISO 178 | 77000 MPa | ||
| bending strength | ASTM D790 | 78.0 MPa | |
| ISO 178 | 800 MPa |
| impact performance | Test Condition | Test Method | Test Result |
|---|---|---|---|
| Impact strength of cantilever beam gap | 23°C,6.35mm | ASTM D256 | 150 J/m |
| Suspended wall beam without notch impact strength | -5°C | ISO 180/1U | 16 kJ/m² |
| Charpy Notched Impact Strength | 23°C | ISO 179/1eA | 2.8 kJ/m² |
| Impact strength of simply supported beam without notch | 23°C | ISO 179/1eU | 13 kJ/m² |
| Impact strength of cantilever beam gap | 23°C,3.18mm | ASTM D256 | 29 J/m |
| 23°C,6.35mm | ASTM D256 | 29 J/m | |
| 23°C | ISO 180/1A | 3.0 kJ/m² | |
| 23°C,3.18mm | ASTM D256 | 160 J/m |
IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.
Contact Us
Get App
Top