PA6 YH-800 SINOPEC BALING

103

Form：Granules

Properties:

Medium viscosity Medium viscosity

Typical Applications:

fibreMonofilamentSuitable for general injection moldingFlame retardant modification and spinning of brownMonofilament etc.

Supplier(1)

Product Description

Certificates(0)

Datasheet

Alternative Model(7)

Product Description

Typical Applications:	fibre \| Monofilament \| Suitable for general injection molding \| Flame retardant modification and spinning of brown \| Monofilament \| etc.
Properties:	Medium viscosity \| Medium viscosity

Certificates

No Data...

Technical Data Sheet

Basic Performance	Test Condition	Test Method	Test Result	Test Unit
density	---	GB 1033-86	1.156	---
Relative viscosity	---	GB/T 1632-93	2.85±0.03	---
mechanical properties	Test Condition	Test Method	Test Result	Test Unit
bending strength	---	GB 9341-88	86.6	Mpa
Shrinkage rate	---	GB/T 1043-93	0.93	%
Shore hardness	---	GB 9341-88	72.2	R
tensile strength	---	GB 1040-92	60.7	Mpa
Impact strength of cantilever beam gap	---	GB 9342-88	20.1	KJ/m
Bending modulus	---	GB 9341-88	2087	Mpa
Elongation at Break	---	GB 1040-92	48.1	%
thermal performance	Test Condition	Test Method	Test Result	Test Unit
Hot deformation temperature	--HDT	---	71.0	°C
Melting temperature	---	---	215-220	°C
Electrical performance	Test Condition	Test Method	Test Result	Test Unit
Volume resistivity		GB 1044-70	1.5*10	Ω.cm
Surface resistivity		GB 1044-70	2.4*10	Ω
Dielectric constant	---	GB 1044-70	0.65	---
Volume resistivity		GB 1044-70	2.7*10	Ω
Surface resistivity		GB 1044-70	3.0*10	Ω
Dielectric loss	Tangent	GB 1045-70	5.0*10

IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.

Get App

Top