PC+ABS

PC+ABS Mablex 319V0 Entec Polymers

Properties:
Filler glass fiber reinforced material 20% filler by weight
Compare

Technical Data Sheet

impact performance	Test Condition	Test Method	Test Result
Impact strength of cantilever beam gap	23°C	ISO 180/1A	10 kJ/m²
Impact strength of cantilever beam gap	Impact strength of cantilever beam gap	-30°C	ISO 180/1A	5.0 kJ/m²

flammability	Test Condition	Test Method	Test Result
Burning wire flammability index	2.0mm	IEC 60695-2-12	960 °C
UL flame retardant rating	3.2mm	Internal Method	V-0
UL flame retardant rating	UL flame retardant rating	1.6mm	Internal Method	V-0

mechanical properties	Test Condition	Test Method	Test Result
Bending modulus		ISO 178	5000 MPa
Tensile strain	Break	ISO 527-2	4.0 %
tensile strength	Break	ISO 527-2	70.0 MPa

thermal performance	Test Condition	Test Method	Test Result
Vicat softening temperature	BallPressureTest(75°C)		Pass
	Vicat softening temperature	--	ISO 306/B50	127 °C
	Vicat softening temperature	Vicat softening temperature	--	ISO 306/A50	135 °C
Hot deformation temperature	1.8MPa,Annealed	ISO 75-2/A	118 °C

Physical properties	Test Condition	Test Method	Test Result
melt mass-flow rate	260°C/5.0kg	ISO 1133	10 g/10min
density		ISO 1183	1.35 g/cm³
Shrinkage rate		ISO 2577	0.20to0.30 %

Electrical performance	Test Condition	Test Method	Test Result
Compared to the anti leakage trace index		IEC 60112	PLC 3
Dielectric strength	1.00mm,in Oil	IEC 60243-1	33 kV/mm
Volume resistivity		IEC 60093	1E+14 ohms·cm
Surface resistivity		IEC 60093	1E+14 ohms

IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.

Get App

Top