PPC LEXAN™ HPH4304 resin

Compare

Technical Data Sheet

physical property	Test Condition	Test Method	Test Result
Melt volume flow rate		ISO1133	40.0 cm³/10min
Shrinkage rate		内部方法	0.60to0.80 %
Water absorption rate		ISO62	0.16 %
Water absorption rate	Water absorption rate		ISO62	0.35 %
density		ASTMD792	1.20 g/cm³
density	density		ISO1183	1.20 g/cm³
melt mass-flow rate		ASTMD1238	8.0 g/10min

Mechanical properties	Test Condition	Test Method	Test Result
Flexural modulus		ISO178	2300 MPa
bending strength		ISO178	100 MPa
Tensile modulus		ASTMD638	2100 MPa
Tensile modulus	Tensile modulus		ISO527-2/1	2150 MPa
tensile strength	Yield	ASTMD638	64.0 MPa
bending strength		ASTMD790	95.0 MPa
Tensile strain	Break	ISO527-2/50	85 %
Flexural modulus		ASTMD790	2200 MPa
Tensile stress	Yield	ISO527-2/50	65.0 MPa
tensile strength	Break	ASTMD638	69.0 MPa
Tensile stress	Break	ISO527-2/50	60.0 MPa
elongation	Yield	ASTMD638	7.0 %
Tensile strain	Yield	ISO527-2/50	6.0 %
elongation	Break	ASTMD638	>50 %

Impact resistance	Test Condition	Test Method	Test Result
Charpy Notched Impact Strength		ISO179/1eA	12 kJ/m²
Charpy Notched Impact Strength	Charpy Notched Impact Strength		ISO179/1eA	50 kJ/m²
		ISO180/1U	NoBreak
Dart impact equipped with measuring instruments		ASTMD3763	120 J
Impact strength of simply supported beam without notch		ISO179/1eU	NoBreak
Impact strength of simply supported beam without notch	Impact strength of simply supported beam without notch		ISO179/1eU	NoBreak
Impact strength of cantilever beam gap		ASTMD256	130 J/m
	Impact strength of cantilever beam gap		ASTMD256	600 J/m
		Impact strength of cantilever beam gap		ISO180/1A	11 kJ/m²
		Impact strength of cantilever beam gap	Impact strength of cantilever beam gap		ISO180/1A	45 kJ/m²
		ISO180/1U	NoBreak

Thermal performance	Test Condition	Test Method	Test Result
		ASTMD648	139 °C
			ISO75-2/Af	134 °C
vicat		ASTMD152510	162 °C
	vicat		ISO306/B50	151 °C
	vicat	vicat		ISO306/B120	153 °C
BallPressure Test		IEC60695-10-2	Pass
		ASTME831	8E-05 cm/cm/°C
			ISO11359-2	8E-05 cm/cm/°C
				ASTME831	8E-05 cm/cm/°C
					ISO11359-2	8E-05 cm/cm/°C

IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.

Get App

Top