
Product Description
Certificates(0)
Datasheet
Product Description
Certificates
No Data...
Technical Data Sheet
| mechanical properties | Test Condition | Test Method | Test Result | Test Unit |
|---|---|---|---|---|
| Impact strength of cantilever beam gap | 泰伯磨耗试验 | ASTM D1044 | 38 | mg/1000cycles |
| 23°C | ASTM D256 | 63.0 | J/m | |
| Bending modulus | 23°C | ASTM D790 | 13000 | Mpa |
| bending strength | 23°C | ASTM D790 | 150 | Mpa |
| Elongation at Break | 23°C | ASTM D638 | 1.5 | % |
| tensile strength | 23°C | ASTM D638 | 110 | Mpa |
| thermal performance | Test Condition | Test Method | Test Result | Test Unit |
| Linear coefficient of thermal expansion | 最大使用温度 | ASTMUL746B | 130 | °C |
| 熔点 | 255 | °C | ||
| MD | ASTM D696 | 2.5E-05 | cm/cm/°C | |
| Hot deformation temperature | 1.80MPaUnannealed | ASTM D648 | 225 | °C |
| 0.45MPaUnannealed | ASTM D648 | 240 | °C | |
| Physical properties | Test Condition | Test Method | Test Result | Test Unit |
| Water absorption rate | ASTM D570 | 0.050 | % | |
| Shrinkage rate | TD | ASTM D995 | 0.80 | % |
| MD | ASTM D995 | 0.20 | % | |
| Electrical performance | Test Condition | Test Method | Test Result | Test Unit |
| Dissipation factor | 耐电弧性 | ASTM D495 | 181 | S |
| Dielectric strength | 2.00mm | ASTM D149 | 36 | KV/mm |
| Volume resistivity | ASTM D257 | 1E+14 | Ω.cm | |
| hardness | Test Condition | Test Method | Test Result | Test Unit |
| Rockwell hardness | ASTM D785 | 90 | M(Scale) | |
| flame retardant performance | Test Condition | Test Method | Test Result | Test Unit |
| UL flame retardant rating | UL -94 | V-0 | 0.75mm | |
| UL -94 | V-0 | 3.00mm | ||
| UL -94 | 5VA | 1.70mm | ||
| UL -94 | V-0 | 1.50mm |
IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.