PP CP EFT 30 IM UV
0
- Properties:Fillermineral filler
CompareTechnical Data Sheet
| physical property | Test Condition | Test Method | Test Result |
|---|---|---|---|
| density | ISO1183 | 1.15到1.20 g/cm³ | |
| melt mass-flow rate | ISO1133 | 3.0到20 g/10min | |
| Shrinkage rate | 0.80到0.90 % |
| hardness | Test Condition | Test Method | Test Result |
|---|---|---|---|
| ISO868 | 65到70 |
| Mechanical properties | Test Condition | Test Method | Test Result |
|---|---|---|---|
| Tensile modulus | ISO527-2 | 2500到3500 MPa | |
| Tensile stress | Yield | ISO527-2 | 30.0到50.0 MPa |
| Tensile strain | Break | ISO527-2 | >8.0 % |
| Impact resistance | Test Condition | Test Method | Test Result |
|---|---|---|---|
| Impact strength of cantilever beam gap | ISO180/1A | >6.0 kJ/m² |
| Thermal performance | Test Condition | Test Method | Test Result |
|---|---|---|---|
| ISO75-2/A | 105 °C | ||
| vicat | ISO306/B | 105 °C | |
| ISO3146 | 160 °C |
IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.
Contact Us
Get App
Top